OBD Connector

GOFFjr1300 said:

Hi, this is a question out in the blue. I don't know anything about this, so I just pop the question. What's about the four pin OBD connector. Is it onely giving info about the ABS, or is it possible to connect a bluetooth device /" thing" to it and get info about RPM, temp, fuel level........?.And use an app to get the info, for example the DMD2 app. I know it's possible to get a cable who has a four pin connector in one end, and a OBD2 connector in the other end. I use the DMD2 app on my phone as a dashboard witch gives me speed, radio handling, Spotify handling, altometer, outside temp, map, and the Sena remote on the helmet gives me the possibility to control radio channels and Spotify. The DMD2 app can give a lot of info on the dash, but it needs a OBD2 dongle. It works on my car, and I was wondering if somebody has tried it on the FJR. I'm a gadget kinda " boy"... This is just some thoughts that's been going on in my head....., and it would be cool if there is some way to make this work.... or is it a dead end, and a stupid question and topic. So to break it down, does the four pin OBD connector only give info about the ABS, or is it possible to get more real time info from this connector?. Is there sombody who has gone down this, maybe stupid road?.

Click to expand...

GOFFjr1300 said:

Hi again. M

Hi again. My bike is an 2008 mod. Looked around on the forum, and found out that gen ll dosent have a OBD connector... Is that correct?.

Click to expand...

GOFFjr1300 said:

Hi, this is a question out in the blue. I don't know anything about this, so I just pop the question. What's about the four pin OBD connector. Is it onely giving info about the ABS, or is it possible to connect a bluetooth device /" thing" to it and get info about RPM, temp, fuel level........?.And use an app to get the info, for example the DMD2 app. I know it's possible to get a cable who has a four pin connector in one end, and a OBD2 connector in the other end. I use the DMD2 app on my phone as a dashboard witch gives me speed, radio handling, Spotify handling, altometer, outside temp, map, and the Sena remote on the helmet gives me the possibility to control radio channels and Spotify. The DMD2 app can give a lot of info on the dash, but it needs a OBD2 dongle. It works on my car, and I was wondering if somebody has tried it on the FJR. I'm a gadget kinda " boy"... This is just some thoughts that's been going on in my head....., and it would be cool if there is some way to make this work.... or is it a dead end, and a stupid question and topic. So to break it down, does the four pin OBD connector only give info about the ABS, or is it possible to get more real time info from this connector?. Is there sombody who has gone down this, maybe stupid road?.

GOFFjr1300 said:

Hi, this is a question out in the blue. I don't know anything about this, so I just pop the question. What's about the four pin OBD connector. Is it onely giving info about the ABS, or is it possible to connect a bluetooth device /" thing" to it and get info about RPM, temp, fuel level........?.And use an app to get the info, for example the DMD2 app. I know it's possible to get a cable who has a four pin connector in one end, and a OBD2 connector in the other end. I use the DMD2 app on my phone as a dashboard witch gives me speed, radio handling, Spotify handling, altometer, outside temp, map, and the Sena remote on the helmet gives me the possibility to control radio channels and Spotify. The DMD2 app can give a lot of info on the dash, but it needs a OBD2 dongle. It works on my car, and I was wondering if somebody has tried it on the FJR. I'm a gadget kinda " boy"... This is just some thoughts that's been going on in my head....., and it would be cool if there is some way to make this work.... or is it a dead end, and a stupid question and topic. So to break it down, does the four pin OBD connector only give info about the ABS, or is it possible to get more real time info from this connector?. Is there sombody who has gone down this, maybe stupid road?.

Click to expand...

My Gen 1 has gauges above the handlebars. Shows fuel level Engine temp.Rpm, and speed. Also a clock. Everything anyone needs.These gauges should be available for all Gen 1 2 and 3. I really think there stock from factory. You should easily be able to find these for your bike and they should plug right in.What you're talking about with thee OBD. Well that's ridiculously unnecessary. Go find some gauges. Should be easy.

Click to expand...

Dan Cooper said:

Gen 1 & 2 scooters do not have an OBD connector (2001 - 2012). Scooter diagnostics are shown on the dash display.

Gen 3 scooters do have an OBD connector (2013 - 2024).

As noted the 4 pin connector next to the battery is the ABS connector for ABS diagnostics.

dan

Click to expand...

SkooterG said:

I am fairly certain OBD connector started with Gen 4 2016 FJRs.

Click to expand...

FJR Flyer said:

I have the adapter and use Torque Pro. As best as I can tell, Yamaha uses proprietory codes. I don't believe motorcycles are required to comply with requirements for autos to use standard codes. I could not find much info on the codes I saw. But I could reset them. I had a code related to a bad TPS.

Click to expand...

FJR30FAN said:

Is that the torque pro obd 2?

Click to expand...

vzhq16 said:

Pages 9-6 to 9-46 of the service manual have the trouble codes you might encounter as well as explanations and some basic diagnostic procedures. The service manual is your friend.

Click to expand...