Search results

The locking set screws were not tight and the ring that pushes down on the spring was not adjusted so the spring was loose until i started screwing down the lock ring to set my sag. The rebound adjustment was 16 clicks out but I don't know how many clicks our the compression was, my fault for...

Yes, I self installed. The bracket that holds the rectifier is in the way this is the same bracket that hold the "soft-hard" valve adjustment. Which I removed the valve but had to leave the bracket because it holds the rectifier and the ABS Valve.

I have installed a 8975 Pensli shock in my 2007 FJR AE with ABS. There is very little room for adjusting the the Compression screw (the top one). I wound up drilling a hole in the rear fender and removing the bolts from the ABS bracket to lower it then putting in a long allen wrench in to turn...

I have installed a 8975 Pensli shock in my 2007 FJR AE with ABS. There is very little room for adjusting the the Compression screw (the top one). I wound up drilling a hole in the rear fender and removing the bolts from the ABS bracket to lower it then putting in a long allen wrench in to turn...

99999-03795-00 SENSOR, ANGLE SET. Anybody know where I can get a good one for a good price

I was messing with the electric shift switch and I now have a error. I have a yellow light on the dash and I need to clear the computer How do I do this?

I was putting a new shock on my 07 FJR and thought I had to pull the shift cover off. I removed the screw that holds the shift switch and a ball bearing fell out. I continued removing the cover to finish the job and the next morning after reassembling the MC I put the switch back together as I...

I was putting a new shock on my 07 FJR and thought I had to pull the shift cover off. I removed the screw that holds the shift switch and a ball bearing fell out. I continued removing the cover to finish the job and the next morning after reassembling the MC I put the switch back together as I...

I installed a PCV and Auto tune today on a 1907 1300AE USA model Silver and I need some help locating the sensors to connect to the PCV. Like Speed input,temp input and what ever else I need?

I was looking for a longer slider for my 2007. Anybody know anybody who sells a longer set?

Has anybody seen or heard about the ABS stuff they are selling on ebay thru Paypal for 750 inc. shipping. Is it any good. https://cgi.ebay.com/ebaymotors/ABS-Fairing...sQ5fAccessories

I have a GPS that is plugged into the power outlet in the utility box and a cell phone that is also plugged into the utility box. Thanks for the tip. Will I have a problem with these not having a filter or should I use the chatterbox filter for all of them?

Is a DC power filter for the chatterbox needed. Can anything else due the job.

Anybody know what the wiring and voltage is inside a Garmin Nuvi 880 power plug I want to fit it to at aux circuit.

Has anybody installed an PC v with auto tune in a 2007 are they worth the price?