Search results

The two different sets of risers I've seen, both used the the six (stock, original) allen head bolts to use with just the bars. They both sent six new bolts to mount the risers and are to re-use the stock bolts for the bars.

"... wheelbase jumping nearly a half-inch in length to 61.0 inches..." hmmm, according to the Yamaha site, comparison between models, the '06 is the same as all other years, 60.6".

I see two other Wi. people on the "who & where" list, https://www.smthng.com/FJREOM/WhoWhere.htm

I got the 9 line abs set up. I was under the impression they did not supply banjo bolts for the clutch & brake resevoir, (thought they wanted us to use stock & cover it up with the rubber boots) and the lower clutch attachment point. (this needs a new looking banjo bolt, eveybody's sees this) I...

Correct! Pending will be riding down with Rocket. I noticed the "who & where" list has beed updated, I see I'm the only Illinois person on the list of 108, as of the end of August.

29 ft. lb.

Mike, I know two fjr's will be at a Lexington Red Roof exit #113 & another @ a Lexington Sherton exit# 115 we'll be meeting up on fri. AM come on over, join us

thanks Diesel, I wasn't coming from that direction, but I think I will now. Guess I'll have to cut Thurs. work day even shorter now.

thank "scooter cruzer", would that routing from Lexington get us into Townsend before dark? better yet, you could lead us through it.

Cya Fri. AM, I'll be at a Red Roof exit #113. I know FJRocket is going to the same Roof. Think your @ exit#115 we'll find ya. What side roads to Knoxville you thinkin' of?

I've been using Pure One PL14610 $6.00 https://motorcycleinfo.calsci.com/FilterStudy.html scroll down to Type 5 filters.

hears a couple more you can check out: blueflame https://www.blueflameperformance.com/bike/evo_race_cans.asp remus https://www.motorsports-network.com/aremus/

The magic words are, "excessive exhaust valve guide wear", not "the tick" https://p083.ezboard.com/ffjr1300ownersasso...icID=1820.topic

I ended up narrowing it down to two. Osram SilverStar H4 & Philips VisionPlus. Neither the North American version. Osram, the well-established German lampmaker, sells a line of bulbs they call "SilverStar". These are Osram's top-of-the-range headlamp bulbs, equivalent to Philips VisionPlus...

The rear ABM rotor, there should be zero play in the rear rotor. The front ABM Rotors (from the Group Buy) are semi-floating to allow for expansion and contraction of the rotor and carrier. This also allows for axial and radial movement of the rotor. All of this results in a better braking...

the rear is SB7100 M7 x 1.0 1.38" left front & clutch are SB8125L M8 x 1.25 1.25" the right front needs to be a little longer SB8125LL M8 x 1.25 1.5" this is what I used on my '04 abs I read on another fjr site about a guy saying the front right was not long enough & he ended up...

I like Valvoline SynPower Synthetic Brake Fluid, It exceeds DOT 3 and DOT 4 specifications. https://www.valvoline.com/pages/products/pr....asp?product=51 about $6.00 a quart

I have a 2004 FJR w/ABS. Used (2) SB 8125L for left front & clutch slave (1) SB7100 for rear, (1) SB8125LL right front

https://www.fjrowners.com/fjro4/usa.html on the left do a search for "ABM" go back 20 or 30 days you'll see several posts on this.

Mine were not labled either. I installed just as your old note says