Search results

Is that a rivet on the rear of each pad? If so is it necessary?

And as an added bonus, the old RR wires are perfectly suited to power an accessory fuseblock under the seat.

Your timing is off... I leave for Iowa next Thursday. then on to Chicago and back to work Tuesday. Try not to leave all the PoPo between here and there pissed off at FJR's ;)

Seeing as I made the last post a year ago... I'd say no this group isn't active. It must have something to do with public education and the literacy rate.

Tonight I buttoned it up after installing a Rostra cruise control. There are a few bugs to work out, but it works!

I believe Garauld plans to make them soon.

I use shortie levers and love them. I cover the brake with my index finger.

I shipped a brand new one to Garauld to use to make patterns. He should have had it a month or so.

13.8 was the best I ever saw (no acc loads) before I installed Jacks harness. Since then I have added lights and heated gear, typically I see 14.0 to 14.3 now.

The tick isn't likely to leave you stuck on the side of the road. You could just ride it till it quits and bury it on the spot.

Mine does this also. I have changed forks (tubes and all) and of course had the wheels off several times. I'm starting to think if I ride in Australia it would drift to the right.

He will jump start it with the electric prods!

I've seen the stop tang method written up and it seems to work well for many. I've never liked ball chains or "slack" in general around throttles. Many automotive installs get around this with a slotted "pull" on the cable that a pin in the linkage slides thru, some have spring loaded guides for...

My Rostra kit arrived today. I have my switch resealed (neutral cure silicone) and the skyway mount ready to go. (Thanks Pinhead) Since I have a backoff module, I have a 5 pin relay and socket at the ready. This will provide (to purple wire) ground when the brakes are off and 12v when brakes...

Get the part number "lit xxxxx" and save a search on ebay. If the listing has binder holes it is likely genuine.

There is always the Aussie PoPo box

Looking at the bottom of that thing, it could be a lawn mower.

Perhaps all that exhaust heat just under the rear master cylinder is a contributing factor.

and is the '13 '14 rebuildable? If not, that 500 bucks spent won't last very long.

I would like to claim her as a dependent