Snowman13
Well-known member
Hi all. Has anyone replaced the OEM windshield on an 08 for the 4" higher shield that Yamaha offers? If you have, are you happy with it. It really looks pretty good in the pictures. Thanks
I've got one. It looks great on the bike but there's not a big difference from the stocker. It's better but I'm going to try a Cee Bailey +4 +4 next. I'm 6'2 for reference.Hi all. Has anyone replaced the OEM windshield on an 08 for the 4" higher shield that Yamaha offers? If you have, are you happy with it. It really looks pretty good in the pictures. Thanks
Thanks for the comeback and I am about 5'11'' so the replacement may work a bit better for me.I've got one. It looks great on the bike but there's not a big difference from the stocker. It's better but I'm going to try a Cee Bailey +4 +4 next. I'm 6'2 for reference.Hi all. Has anyone replaced the OEM windshield on an 08 for the 4" higher shield that Yamaha offers? If you have, are you happy with it. It really looks pretty good in the pictures. Thanks
Thanks for the reply. I will have to look into the Cee Bailey and check them out.I've got one. It looks great on the bike but there's not a big difference from the stocker. It's better but I'm going to try a Cee Bailey +4 +4 next. I'm 6'2 for reference.Hi all. Has anyone replaced the OEM windshield on an 08 for the 4" higher shield that Yamaha offers? If you have, are you happy with it. It really looks pretty good in the pictures. Thanks
Not sure if the shields are different. ThanksHow are the 08 windshields any different than the 06 or 07? Many folks are very happy with the various brands of aftermarket shields out there.
At 5'11 it might be just right. I've noticed if I duck down about an inch or 2 it's pretty quiet.Thanks for the comeback and I am about 5'11'' so the replacement may work a bit better for me.
I'm 5'10", that was my thought, too. "Get the touring shield and see if its right for my size." Little wider, little bigger, should be juusst right! :yahoo:At 5'11 it might be just right. I've noticed if I duck down about an inch or 2 it's pretty quiet.Thanks for the comeback and I am about 5'11'' so the replacement may work a bit better for me.
That is pretty much what I was thinking. I might just go for it but I still think I will look around. Thanks a bunch for the imput, it has been a great help. Be safe. LaterAt 5'11 it might be just right. I've noticed if I duck down about an inch or 2 it's pretty quiet.Thanks for the comeback and I am about 5'11'' so the replacement may work a bit better for me.
Thanks for getting back to me about the shield. What do you think the Cee Bailey would be like if it were a +4+2 without the reverse contour? Also, is the material of the shield of a higher quality and thickness than that of the stock shield? Thanks again and be safe.I replaced my stock shield with a +4+2 Cee Bailey reverse contour flip shield. It works great and give me a still air pocket in all conditions except for a stiff side wind. I'm 5'10" using the high seat position and am a music listener using earphones.
I highly recommend this shield.
Janet,I put the CalSci medium on mine. I could immediately tell a difference with it in the down position. It is much quieter. The stock shield in the up position had the air stream hitting me in the visor causing a lot of wind noise. The different shape of the CalSci changed that. I now run with the CalSci shield about halfway up with no problems. I am 5'10.
Janet
Yes. The wind is over my helmet with the windshield about half way up and my seat in the lower position.Does the CalSci, when it is all the way up, toss the wind over the top of you helmet?
Thx.
Enter your email address to join: