where do the plugs for the LH switch assy attach ? and where are the wires and plugs routed to ? or more importantly what do I HAVE TO remove to replace the LH switch assy ?
2005 - LH (turn signal) switch assy - wire routing
- Thread starter faster675
- Start date
Help Support Yamaha FJR Motorcycle Forum:
.... TTT .... Please Help ?
Does anyone know the answers to my previous questions ?
I'd sure hate it if I have to take off all the fairings, the fuel tank, the radiator, the air box, the injectors,
and the upper fairing, only to find that I could have only removed the radiator to replace the LH turn signal switch.
.... not 100% sure, but I think the FSM does not detail this procedure ?
Does anyone know the answers to my previous questions ?
I'd sure hate it if I have to take off all the fairings, the fuel tank, the radiator, the air box, the injectors,
and the upper fairing, only to find that I could have only removed the radiator to replace the LH turn signal switch.
.... not 100% sure, but I think the FSM does not detail this procedure ?
madmike2
Shtirrenuppenmeister
I've never done one. I have had the switch ass'y off the handlebar but did not remove the switch.
I'm not home and won't be until Sunday night (At FJRay's Reuben Run in Oregon).
IIRC, the wires go to relays in the nose fairing but may enter via a loom above the engine. I'd need to check the wiring diagrams in the FSM.
I'm not home and won't be until Sunday night (At FJRay's Reuben Run in Oregon).
IIRC, the wires go to relays in the nose fairing but may enter via a loom above the engine. I'd need to check the wiring diagrams in the FSM.
Queensland Ken
Well-known member
By the looks of it, page 8-4 of the manual, the connector block is under the tank, forward of the motor.
Thank You !
ionbeam
2 FUN
The wire runs can also be found in section 2 of the FSM "Cable Routing". In my early publication two book Gen I FSM it has the routing starting at page 2-52.
Similar threads
