Gramps
Well-known member
As a few of you may know I’ve just recently (March) purchased a 2013 Triumph Tiger Explorer 1200. It’s the 2nd model year and I intentionally waited so that any major bugs would be worked out before I bought. In order to make the purchase I had to first, and most importantly, make sure the wife was comfortable with the erogos and the ride. She hated the stiff suspension of the FJR but, needless to say, very satisfied with the ’97 Gold Wing. Well much to my surprise she was very comfortable on the Explorer when we test rode it and gave me the go ahead.
First decision sell both bikes. The Gold Wing was sold last fall and the FJR was traded in for the Explorer after stripping all the accessories and selling them for buying Explorer accessories.
Okay now the bike. Below are the specs:
Engine and Transmission
Type
Liquid-cooled, 12 valve, DOHC, in-line three-cylinder
Capacity
1215cc
Bore/Stroke
85 x 71.4mm
Fuel System
Ride by wire, fuel injection
Exhaust
Stainless steel 3 into 1 , side mounted stainless steel silencer
Final Drive
Shaft
Clutch
Wet, multi-plate
Gearbox
6-speed
Oil Capacity
4.0 liters (1.1 US gals)
Chassis, Running Gear and Displays
Frame
Tubular steel trellis frame
Swingarm
Single-sided, cast aluminum alloy with shaft drive
Wheel
Front
Cast aluminum alloy 10-spoke 19 x 2.5in
Rear
Cast aluminum alloy 10-spoke 17 x 4.0in
Tire
Front
110/80 R 19
Rear
150/70 R 17
Suspension
Front
KYB 46mm upside down forks, adjustable preload, 190mm travel
Rear
KYB monoshock with remote oil reservoir, hydraulically adjustable preload, rebound damping adjustment, 194mm rear wheel travel
Brakes
Front
"Twin 305mm floating discs, Nissin 4-piston calipers, Switchable ABS
Rear
Single 282mm disc, Nissin 2-piston sliding caliper, Switchable ABS
Instrument Display/Functions
LCD instrument pack with digital speedometer, analogue tachometer, gear position indicator, fuel gauge, range to empty, service indicator, clock, air temperature, frost warning, hazard warning lights, trip computer, Tire pressure monitoring system
Dimensions and Capacities
Length
2248mm/88.4in
Width (handlebars)
962mm (37.9in)
Height without mirrors
1410mm/55.5in
Seat Height
837mm (32.9in) - 857mm (33.7in)
Wheelbase
1530mm/60.2in
Rake/Trail
23.9 degree/105.5mm
Fuel Tank Capacity / Efficiency
20 liters/5.3 US gals
Wet Weight (ready to ride)
259kg/570lbs
Performance (measured at crankshaft to 95/1/EC)
Maximum Power
137PS/135bhp/101kW @ 9300rpm
Maximum Torque
121Nm/89 ft.lbs @ 6400rpm
Fuel Efficiency
38 City / 57 Highway *Estimated from fuel economy tests on a sample motorcycle conducted under ideal laboratory conditions. Actual mileage may vary based upon personal riding habits, weather, vehicle condition, and other factors.
Price
MSRP
$15,699* Price is MSRP, and excludes tax, title, license, options, handling, pre-delivery, and destination charges. Specifications and MSRP are subject to change without notice. Actual price determined by dealer.
Fit & finish first impressions: The overall look of workmanship quality is excellent. Very good paint, good quality parts and plastic alignment looked to be very good. Triumph had done their homework.
I now have 3000 mile under my belt and I’m still in love with the bike, but as with all bikes, there were a few items that didn’t meet my expectations. First and foremost is the stock seat (not surprising). It is way too soft with no support. It’s torture after a couple hundred miles. In order to somewhat compensate for this deficiency I’m using a gel pad until I can send the pans off this winter to get reworked. Also, after installing a few electronics (fuse block, heated gear & gps) which required plastic removal, I found that things didn’t align back together quite so smoothly. Eventually it did. Oil changes are a snap, battery under the seat (as it should be) and plenty of room under the seat too. Stock tools are crap, stock replacement turn signal bulbs are not standard and are hard to find (even at the dealer). Also, which is always in the back of my mind, is the limited dealership network. Hope I never have to try to find one while on the road in nowhere land.
The on board computer is awesome. Maybe because I’ve never had such an amenity. The only downside is that the traction control & ABS cannot be controlled on the fly. You have to stop, engine running, put the bike in neutral (kickstand down) and cycle through the menus to change those options and then if the bike is turned off and restarted everything reverts back to the default setting. Or with the engine off, key to on position (bike electronics powered), select desired settings, then start. Not a big problem just inconvenient.
The suspension is very good but not great. The front has only spring compression adjustments, but the back monoshock has both compression & dampening adjust ability. Also, as you would expect from any dual sport, the amount of travel in the suspension is quite lengthy which provides a very smooth ride on just about all types of road surfaces.
The stock brakes are okay but not as good as the FJR. From what I’ve read changing out the pads for metallic/sintered pads makes a big difference but may shorten the life of the rotor. I can live with that so I’ll be changing them out after they’re toast.
The ride position is upright & for me very comfortable. At speed the triple is smooth & quiet seeming quite tame, but apply some throttle and the power becomes very evident & responsive. Hardly any drive train lash, feels more like chain drive. My ’05 FJR had a noticeable delay between throttle input and power to the tire.
I recently got back from SFO in Arkansas and clocked about 1850 miles for the trip and the bike performed flawlessly. I always felt in control, in fact I could ride the bike as hard as my FJR. I’m not sure if it was the taller narrower tires & slightly lighter weight, but the bike felt more nimble in and out of turns even with the Metzeler Tourance 85/15 dual sport tires. I did push the speed over the century mark and had plenty of throttle left, and the bike was rock solid. Needless to say I was impressed.
I haven’t been off-road much, just gravel roads and it felt very comfortable & controllable. I may try some forest service roads but that’s about as far as I’ll push it. It’s too heavy for trail riding & I’m not 20 anymore.
That’s about all I got for now, I’ll try to update as the mileage increases.
First decision sell both bikes. The Gold Wing was sold last fall and the FJR was traded in for the Explorer after stripping all the accessories and selling them for buying Explorer accessories.
Okay now the bike. Below are the specs:
Engine and Transmission
Type
Liquid-cooled, 12 valve, DOHC, in-line three-cylinder
Capacity
1215cc
Bore/Stroke
85 x 71.4mm
Fuel System
Ride by wire, fuel injection
Exhaust
Stainless steel 3 into 1 , side mounted stainless steel silencer
Final Drive
Shaft
Clutch
Wet, multi-plate
Gearbox
6-speed
Oil Capacity
4.0 liters (1.1 US gals)
Chassis, Running Gear and Displays
Frame
Tubular steel trellis frame
Swingarm
Single-sided, cast aluminum alloy with shaft drive
Wheel
Front
Cast aluminum alloy 10-spoke 19 x 2.5in
Rear
Cast aluminum alloy 10-spoke 17 x 4.0in
Tire
Front
110/80 R 19
Rear
150/70 R 17
Suspension
Front
KYB 46mm upside down forks, adjustable preload, 190mm travel
Rear
KYB monoshock with remote oil reservoir, hydraulically adjustable preload, rebound damping adjustment, 194mm rear wheel travel
Brakes
Front
"Twin 305mm floating discs, Nissin 4-piston calipers, Switchable ABS
Rear
Single 282mm disc, Nissin 2-piston sliding caliper, Switchable ABS
Instrument Display/Functions
LCD instrument pack with digital speedometer, analogue tachometer, gear position indicator, fuel gauge, range to empty, service indicator, clock, air temperature, frost warning, hazard warning lights, trip computer, Tire pressure monitoring system
Dimensions and Capacities
Length
2248mm/88.4in
Width (handlebars)
962mm (37.9in)
Height without mirrors
1410mm/55.5in
Seat Height
837mm (32.9in) - 857mm (33.7in)
Wheelbase
1530mm/60.2in
Rake/Trail
23.9 degree/105.5mm
Fuel Tank Capacity / Efficiency
20 liters/5.3 US gals
Wet Weight (ready to ride)
259kg/570lbs
Performance (measured at crankshaft to 95/1/EC)
Maximum Power
137PS/135bhp/101kW @ 9300rpm
Maximum Torque
121Nm/89 ft.lbs @ 6400rpm
Fuel Efficiency
38 City / 57 Highway *Estimated from fuel economy tests on a sample motorcycle conducted under ideal laboratory conditions. Actual mileage may vary based upon personal riding habits, weather, vehicle condition, and other factors.
Price
MSRP
$15,699* Price is MSRP, and excludes tax, title, license, options, handling, pre-delivery, and destination charges. Specifications and MSRP are subject to change without notice. Actual price determined by dealer.
Fit & finish first impressions: The overall look of workmanship quality is excellent. Very good paint, good quality parts and plastic alignment looked to be very good. Triumph had done their homework.
I now have 3000 mile under my belt and I’m still in love with the bike, but as with all bikes, there were a few items that didn’t meet my expectations. First and foremost is the stock seat (not surprising). It is way too soft with no support. It’s torture after a couple hundred miles. In order to somewhat compensate for this deficiency I’m using a gel pad until I can send the pans off this winter to get reworked. Also, after installing a few electronics (fuse block, heated gear & gps) which required plastic removal, I found that things didn’t align back together quite so smoothly. Eventually it did. Oil changes are a snap, battery under the seat (as it should be) and plenty of room under the seat too. Stock tools are crap, stock replacement turn signal bulbs are not standard and are hard to find (even at the dealer). Also, which is always in the back of my mind, is the limited dealership network. Hope I never have to try to find one while on the road in nowhere land.
The on board computer is awesome. Maybe because I’ve never had such an amenity. The only downside is that the traction control & ABS cannot be controlled on the fly. You have to stop, engine running, put the bike in neutral (kickstand down) and cycle through the menus to change those options and then if the bike is turned off and restarted everything reverts back to the default setting. Or with the engine off, key to on position (bike electronics powered), select desired settings, then start. Not a big problem just inconvenient.
The suspension is very good but not great. The front has only spring compression adjustments, but the back monoshock has both compression & dampening adjust ability. Also, as you would expect from any dual sport, the amount of travel in the suspension is quite lengthy which provides a very smooth ride on just about all types of road surfaces.
The stock brakes are okay but not as good as the FJR. From what I’ve read changing out the pads for metallic/sintered pads makes a big difference but may shorten the life of the rotor. I can live with that so I’ll be changing them out after they’re toast.
The ride position is upright & for me very comfortable. At speed the triple is smooth & quiet seeming quite tame, but apply some throttle and the power becomes very evident & responsive. Hardly any drive train lash, feels more like chain drive. My ’05 FJR had a noticeable delay between throttle input and power to the tire.
I recently got back from SFO in Arkansas and clocked about 1850 miles for the trip and the bike performed flawlessly. I always felt in control, in fact I could ride the bike as hard as my FJR. I’m not sure if it was the taller narrower tires & slightly lighter weight, but the bike felt more nimble in and out of turns even with the Metzeler Tourance 85/15 dual sport tires. I did push the speed over the century mark and had plenty of throttle left, and the bike was rock solid. Needless to say I was impressed.
I haven’t been off-road much, just gravel roads and it felt very comfortable & controllable. I may try some forest service roads but that’s about as far as I’ll push it. It’s too heavy for trail riding & I’m not 20 anymore.
That’s about all I got for now, I’ll try to update as the mileage increases.