Aluminum Grab bars Gen 2 (2010)

[propbuildervash]

Hello,

I was looking to install the aluminum grab rail set. Yamahas website only lists these for 2013 and newer boxes. Are these not compatible with the 2010 (gen 2?)

I assume the old plastic one has just the two mounting points where the new one is mounted to the rail where the passenger seat attaches with brackets. I just couldn't confirm if they are compatible and didn't want to waste $200.

Jeff

 

[escapefjrtist]

Yes, confirmed the OE upgrade aluminum rack will fit '06 to '15. Rear subframe, seats and tails are the same. It will not fit when using a Corbin Smuggler in place of rear seat. IIRC the Smuggler needs modifications to properly latch.

~G

 

[propbuildervash]

Sweeeeeet! Thank you! I will get one ordered.

What is the recommended rear weight limit when using the Yamaha aluminum grab handle without/without a stiffy kit?

I'm thinking of going with the Shad rear case as it was noted to me that it works with a pirate lair backrest.

Jeff

 

[user 99198]

Yes, confirmed the OE upgrade aluminum rack will fit '06 to '15. Rear subframe, seats and tails are the same. It will not fit when using a Corbin Smuggler in place of rear seat. IIRC the Smuggler needs modifications to properly latch.

~G

AND not only the Smuggler, but also the earlier Corbin passenger seat will not fit either. Jevers

 

[Whooshka]

You do not need a Stiffy kit with Yami's aluminum rack.

 

[user 99198]

Hmmm..... my '18 came with the Yamaha large top case and the stiffening kit. I just assumed that it was required. Good to know, thank you!

 

[escapefjrtist]

<<snip>>I'm thinking of going with the Shad rear case as it was noted to me that it works with a pirate lair backrest.

Jeff

I've been using Givi top cases along with the SR357 replacement rack for years. Most recent is a V47 case used for trips with my SO. I always load the top case with lightweight bulky items such as electric (or regular) liners, daily need items and finally a water bottle.

Be smart, don't overload the trunk and you'll be fine.

~G

Edit: Here's the OE Aluminum Rear Rack with listed fitment.

 

[propbuildervash]

I don't know if the givi would work with my pirates lair backrest mount. I saw someone else using pirates lair backrest with an aluminum rail on a gen 3 with the PL backrest and a shad topcase. I just need a place to shore my waterproof liners and misc stuff. The side cases will be used for regular clothes.