Are Rifle Fairings still in business or gone the way of Bike Bandit?

[SkooterG]

Sad and unfortunate.

 

[SkooterG]

Anyone have an old Rifle windscreen they aren't using? I am in need of one.

 

[RossKean]

Anyone have an old Rifle windscreen they aren't using? I am in need of one.

Good luck - you probably should mention which Gen, just in case someone has one...

 

[SkooterG]

Good luck - you probably should mention which Gen, just in case someone has one...

Ooops! Good point!

Gen 2 (2006-2012)

 

[two wheels]

I have a second gen rifle with all hardware and tuning blocks.I left you a message over on the other site.willing to split shipping from Washington State.I sold my 07 and as you know it will not work on my 3rd gen.Jerry.

 

[BILI]

Anyone have an old Rifle windscreen they aren't using? I am in need of one.

I don't have a Rifle windscreen, but I have an OE from a 2018, and a Yamaha Touring windhield. Both are excellent.
Billy
908 868 3104

 

[RossKean]

I don't have a Rifle windscreen, but I have an OE from a 2018, and a Yamaha Touring windhield. Both are excellent.
Billy
908 868 3104

Neither of which will fit a Gen II FJR...

 

[Wizard37]

I have a 2019. I looked at Rifle but the didn’t have one for this gen. I got a CalSci screen. When fully up had massive buffeting due to the nose almost touching the fairing. I wool tufted inside and out to see what was going on. The screen was too vertical in all positions. I designed and printed stand-offs to lift and angle the screen backwards. The nose gap and the reduced incidence allowed a flow along the inside of the screen. No buffeting. I printed the rail stand-offs in ABS. So far over at least 35K miles, temperatures 22 to 104F and into triple digits (occasionally) it works. The screen in the tall version so the loading on the rails is not insignificant.
The geometry of the rails is complex. Hope this helps.