Cee Bailey's 23" tall windscreen / trade 21" tall

[FJRydr]

Looking for the tallest one, 23", that Cee Bailey's made for GenII. Prefer slight tint and must be in good condition.

For possible trade, I have a nice 21" tall CB that's slightly tinted. If I find a 23" tall then my CB will become available.

 

[jblanken64]

FWIW, I have the 21" reverse flip Cee Bailey and attached the cheap knockoff of the MRA Vario to the top of it. That gives me what I wanted and in the summer I can even angle that little screen down to act as an air scoop. Not quite as aesthetically pleasing as I would like, but not too bad with an additional level of functionality. And Cee Bailey's are like unicorns now.

 

[FJRydr]

FWIW, I have the 21" reverse flip Cee Bailey and attached the cheap knockoff of the MRA Vario to the top of it. That gives me what I wanted and in the summer I can even angle that little screen down to act as an air scoop. Not quite as aesthetically pleasing as I would like, but not too bad with an additional level of functionality. And Cee Bailey's are like unicorns now.

Where did you find your faux MRA Vario?

Thanks!

 

[jblanken64]

Where did you find your faux MRA Vario?

Thanks!

There was a link on one of the forums about where to order it. It may have been on alibaba, aliexpress, or rakuten, maybe even ebay. I just don't recall. I do remember that it took so long to show up that I had forgotten totally about it. When it finally did, it was like having another Christmas. 

I'll see if I can find it in an email archive, but I'm not optimistic.

 

[jblanken64]

Try this. It seems similar to what I bought.

https://www.ebay.com/itm/Clip-On-Windshield-Extension-Spoiler-Wind-Deflector-For-Most-Motorcycle-Clear-US/353181901590?hash=item523b482316:g:j9wAAOSw7Z5eCrOu

Mine is roughly 5" x 15", measured top to bottom in the middle and side to side at the widest point.

 

[FJRydr]

Try this. It seems similar to what I bought.

https://www.ebay.com/itm/Clip-On-Windshield-Extension-Spoiler-Wind-Deflector-For-Most-Motorcycle-Clear-US/353181901590?hash=item523b482316:g:j9wAAOSw7Z5eCrOu

Mine is roughly 5" x 15", measured top to bottom in the middle and side to side at the widest point.

Appreciate it! I ordered one, lots of them on ebay for under $25 shipped. I ordered from a seller in CA, so faster shipping (1 week) with domestic seller versus overseas.

Years ago I had a 90's BMW K1100RS that had a wind spoiler built into the fairing that worked very well. Similar concept with these clip-on wind deflectors.

 

[FJRydr]

FOUND: 23" tall CB shield.