Cornering Lights

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
You'll have to find the yaw sensor . and override it .

Maybe Brody knows how to get around it.

 
Yaw sensor is tucked back just in front of the rear light cluster.

[edit] It's the black box just visible to the left of this pic.

(Click on image for larger view)



[/edit]

No idea how to override it.

I would expect the cornering lights to aim high when the bike is upright, more likely to be lighting up the crowns of trees rather than their trunks.

 
Last edited by a moderator:
The CLCU (cornering light control unit) is in headlight unit. It controls the cornering lights but gets the lean angles from the IMU (inertial measurement unit) under the tail. Also connected with the ECU.

Good luck with that.

 
Not that I have a Gen III, I have thought about if the corning lights could be set/rewired some how to be day time runners. Now that I have replaced my headlights with LEDs and see the cooling involved with that, will the cornering LEDs stay cool enough if they are on all the time? I haven't seen what cornering LEDs look like on the back side to dump any heat or if there is anything to do that since they were designed to be on for pretty short periods of time.

 
Being pedantic, the lights respond to roll (lean) with the direction of the roll/lean determining left or right light set. The lean angles for the lights are 7, 11, and 16 degrees. Yaw, changing direction, doesn't trigger the cornering lights.

 
Last edited by a moderator:
This isnt exactly what you want, but it appears if you can gain access to the diag tools, you can reduce (or increase) the trigger angle

IMkBb3.png


-Steve

 
Top