kolonial72
Well-known member
Not sure that this is the right place to present this, but here goes.
A few days ago, I was taking a fairly leisurly ride through some familiar territory. I was in some hilly, twisty terrain approaching a right-hander posted 25 mph. Visibility around this curve is limited. I was going just under 30. As I entered the shadow of a tree right before I leaned in, I saw that sand had washed out across the entire road in the middle of the curve, which was also in the shadow. Mind you, this was the first time I'd seen wash-out on or near this curve. Anyway, there was little room for braking prior to leaning, and I try to stay off the brakes while leaned. So I decided to roll off the throttle a bit before the sand and then maintain RPM across the sand. Basically held speed to prevent too much torque being transmitted to the rear wheel in either the forward or reverse direction.
The rear tire stepped out to the left about 6 inches (that's a guess of course) when I hit the sand. Once traction was regained, the rear went back a bit right of center, then left a tad, then centered nicely. I'm not sure, but I think I rolled off the throttle some more when the rear went back to the right the first time. So after a well-deserved "Holy shit!" I went along my merry way.
As you will all no doubt recognize, a better answer would have been to see the sand earlier and then lower speed before the turn. For the sake of arguement, let's pretend this wasn't an option because it didn't happen. What suggestions would the experienced riders have for handling this kind of situation in the future?
A few days ago, I was taking a fairly leisurly ride through some familiar territory. I was in some hilly, twisty terrain approaching a right-hander posted 25 mph. Visibility around this curve is limited. I was going just under 30. As I entered the shadow of a tree right before I leaned in, I saw that sand had washed out across the entire road in the middle of the curve, which was also in the shadow. Mind you, this was the first time I'd seen wash-out on or near this curve. Anyway, there was little room for braking prior to leaning, and I try to stay off the brakes while leaned. So I decided to roll off the throttle a bit before the sand and then maintain RPM across the sand. Basically held speed to prevent too much torque being transmitted to the rear wheel in either the forward or reverse direction.
The rear tire stepped out to the left about 6 inches (that's a guess of course) when I hit the sand. Once traction was regained, the rear went back a bit right of center, then left a tad, then centered nicely. I'm not sure, but I think I rolled off the throttle some more when the rear went back to the right the first time. So after a well-deserved "Holy shit!" I went along my merry way.
As you will all no doubt recognize, a better answer would have been to see the sand earlier and then lower speed before the turn. For the sake of arguement, let's pretend this wasn't an option because it didn't happen. What suggestions would the experienced riders have for handling this kind of situation in the future?