disconnect O2 sensor on 08 fjr

[saxman49]

I'm trying to find the location of the plug for the O2 sensor I need to disconnect in order for my PCIII USB to work properly. I've called 2 local Yamaha dealers and they seem clueless. FJR Tech site has a post for this but obviously shows a bike that is not an 08. I looked under thank when I plugged in the PCIII but there was no plug matching Warchilds description. He calls for a 2 wire plug, grey and at my O2 sensor on the exhaust there are 3 wires and the wire colors don't match his description either.

So, if anyone out there knows, let me know so I can get on with this already. I'm so anxious to feel the results everyone is bragging about!

Later,

 

[Wicked Webby]

It plugs in under the gas tank and heat shield. Along the right side of the bike. If you pull on the 02 wire coming from the sensor you will feel which one to unplug.

WW

 

[Bogus]

saxman, here is a link for the 08 that has a picture. I had the same problem until I asked here! Sroll down a ways and you sill see it.

 

[Fubar]

All I did was find the sensor where it went into the header and followed it up as far as I could and the pushed and pulled on it a little and watched for the connector to move... It's not hard to find. Small connector.