Randy
Well-known member
If you're planning on doing a Power Distribution block install, I have some left over pieces and will send them out for free.
- Approx 20 ft of black and approx 25 ft of red 14ga wire for wiring up positive and negative lines for your farkles once the block is installed.
- Same length of blue 14ga wire for running off of a feed into the relay
- 5ft of 3/8" plastic wire loom
- blade connectors for the relay
- ring connectors to go from the power feeds to the block
- solderless/crimpless connector to tap a 14 ga line off of a powered feed that will go to the relay
Send me PM or email to let me know what you need and provide address.
- Approx 20 ft of black and approx 25 ft of red 14ga wire for wiring up positive and negative lines for your farkles once the block is installed.
- Same length of blue 14ga wire for running off of a feed into the relay
- 5ft of 3/8" plastic wire loom
- blade connectors for the relay
- ring connectors to go from the power feeds to the block
- solderless/crimpless connector to tap a 14 ga line off of a powered feed that will go to the relay
Send me PM or email to let me know what you need and provide address.
