Hi - I am starting to wind down the list of items I would make, kind of like retirement. Here's an updated [as of 12-13-2019] catalog listing of the items I normally make summarized in one place. Hopefully the photos will stay intact. If anything here interests you, please send me a personal message (PM) by clicking my member handle or send me an email at GTWorksLLC on Gmail. I will need your zip code to calc shipping costs. All products come with money back guarantee - no problemo. Some prices may have changed and availability is based on my frame of mind.
In addition to these items, I may be able to make up specials to suit your specific needs. I also offer design and prototyping services for non-FJR items. I have repaired and repainted many lids and other parts - if you need this service, contact me.
Please refrain from adding comments in this thread - put them in the Vendor Feedback thread instead. Thanks a bunch for looking and ride safe!
Luggage Racks - Gen1
Sorry, I am no longer making Gen1 racks.
Luggage Racks - Gen2/3
I have made two different styles for Gen2/3 racks (Standard, and Sport). All my racks are made of solid aluminum alloy and then TIG welded together. I normally powdercoat them satin black, but other common powdercoat colors are available. No modifications to the bike are needed for any of these - they just bolt on. Backrests can be added to any of the racks for $150 additional. Backrests can be either removable or permanently attached. Here is the Standard style - approx. 12" x 16-1/2" wide. Cost is $240 plus S&H for one powdercoated satin black:
Next is the smaller Sport style rack - approx. 10-1/2" x 11-1/2" wide. Cost is $200 plus S&H for one powdercoated satin black:
Backrests can be added to either of these racks for $150. The following images show the removable and permanent attachment styles:
Backrests - Gen1
I am no longer making backrests for Gen1 bikes.
Backrests - Gen2/3
I can also provide a backrest for your Gen2 or 3 bike as shown below for $230 plus S&H. These show the Saddlemen pad I now use for backrests. The frames are normally powdercoated satin black. It sets on top of the rack and uses longer SST bolts and spacers that I include.
Highway pegs kits
I have available highway peg kits for all model years - the mounting plates are the same. I normally powdercoat the plates, spacers and pegs dark silver (similar to the engine cases) for Gen1 & 2 bikes, or bright silver for the Gen3 bikes. Other color options are available. The stateside cost for just the plates, spacers and SST screws are $70 in case you wish to mount your own pegs. Add $35 for universal-style pegs shown in the first images or $70 for the Rivco anti-vibe pegs shown in the second set of pics. Note - the left plate does not interfere with oil filter replacement.
Universal:
Rivco:
This is what normally is included in a complete kit:
Stiffy kits
You may have read that some riders have experienced failure of the subframe - I have developed reinforcement kits that will substantially reduce the
chance of failure, and, if it were to happen, keep all the loosey items together until it can be serviced. A typical failure:
Gen1:
The stiffy kit for Gen1 bikes is $70 delivered stateside:
Gen2/3:
The stiffy kit for Gen2/3 bikes is $100 plus S&H:
Hydration systems
I can make you a hydration system to satisfy your thirst on the long haul. They come in 1/2 and 1-gal sizes and are mounted to one of your rear passenger footpegs. Included in the kit is a Coleman jug (you have some choice of colors), a base (again, you can pick a color), tubing and a bite valve. A quick-release latch makes removal quick for LD riders. Cost for the 1/2 gal kit is $100 plus S&H. Add $20 for the 1-gal kit. Note - these kits can be mounted to other bikes as well.
Radar Detector mount kit
I have available, a kit that allows you to mount your RD atop one of the handlebar fluid reservoirs. Finish is satin black powdercoat. Stateside delivered cost is $50.
Handguard extenders
These help keep your fingertips a bit warmer by deflecting the cold air lower than the V-Strom hand guards. $25 delivered stateside.
. I have the gen 2, 2007 mod. 
