Gen 11 Stator voltage output.

[Taff]

Hi peeps,

Could any of the electrical gurus on this forum please advise me at what minimum RPM will the stator charge the battery.

I was informed that around 4000 RPM, the stator will be at maximum output for battery charging on Gen 11 bikes, hence my question about minimum RPM values.

Thanks you kindly,

Ride safe.

 

[wfooshee]

With no load but the bike itself (lights, ECU, ignition) it'll be charging at idle.

 

[Taff]

With no load but the bike itself (lights, ECU, ignition) it'll be charging at idle.

Thanks for that.

Do you know if the max output from the stator is at or around 4000 RPM?

 

[madmike2]

Do you know if the max output from the stator is at or around 4000 RPM?

Its in the "Bin-O-Facts".

Look under "FJR TECHNICAL FORUMS"; FAQs and Common Historical Information; "'06-'07 Bin-O-Facts (GenerationII)".

If you scroll down the thread you will find ELECTRICAL. The information is in the paragraph under that heading.

 

[Taff]

Do you know if the max output from the stator is at or around 4000 RPM?

Its in the "Bin-O-Facts".

Look under "FJR TECHNICAL FORUMS"; FAQs and Common Historical Information; "'06-'07 Bin-O-Facts (GenerationII)".

If you scroll down the thread you will find ELECTRICAL. The information is in the paragraph under that heading.

Thanks for the link, I will take a look see :yahoo: