Handguard fit?

[bigdog]

Will 2004-2011 Vstrom 650 guards fit an FJR?
https://a.co/d/bmRcpyM
Thanks

 

[escapefjrtist]

Recent discussion here 'bigdog. Most any year will fit, some could require different hardware and (slight) modifications than others. Link I posted in other thread is confirmed fit.

~G

 

[Ktmguy1]

If you’re looking to not having to mess with the bar ends like me, due to having a throttle lock. I saw someone else used a set made for a newer bmw k1600 with a little bit of fabrication. I think I’m going to try this out also just for some wind deflection during colder months.

 

[infrared]

Not sure what you have there, but on my 2008, I drilled and tapped the lever pivot bolt head for a small machine screw. It does not need to be much of a screw, 1/8" (3mm) or so. Mounted the front with a washer and machine screw on each hand I cut the rear "C" end a bit deeper in the center of the "C" to make a good fit there on the bar end weights. Easy work with a utility knife, cutting a little at a time.

I really like the wind protection in cold weather, and on my black FJR, these black hand defenders appear to be stock.