I just purchased this: INNOVV ThirdEYE. I plan to design 3D print holder for Mirror indicators, locate them next to my NAVI. Anyone here with this (or similar) product installed on FJR?
Last edited:
INNOVV ThirdEYE BSD system
- Thread starter kebo123
- Start date
Help Support Yamaha FJR Motorcycle Forum:
I installed INNOVV ThirdEYE on my bike. Product itself is nice, robust and well done. To install it on FJR with clean look and as less as possible bike parts modification was a bit challenge, but overall I am very glad with the result, therefore I decided to share it here.
Product how it's arrived:
Place where I decided to installed the radar. I made small metal bracket and attached it under license plate:
Electronic unit find it's place under rear right fairing, attached by 3M self adhesive tape (included in the package):
Most challenging was to decide where and how to place display units. I decided to redesign and adopt my 3d printed GPS holder. Here how it looks in CAD:
Product how it's arrived:
Place where I decided to installed the radar. I made small metal bracket and attached it under license plate:
Electronic unit find it's place under rear right fairing, attached by 3M self adhesive tape (included in the package):
Most challenging was to decide where and how to place display units. I decided to redesign and adopt my 3d printed GPS holder. Here how it looks in CAD:
Last edited:
Photos from the installation:
And final result - without NAV:
With NAV:
I tested it on short ride and all works as advertised. System detected vehicles arriving from the rear (cars, motorbike or even bike) when my bike was stationary or slowly moving - left or right fine. Also fast arriving vehicles with both LED displays activated.
Will add also some feedback later, after longer trip, so far I am happy with the product.
With NAV:
I tested it on short ride and all works as advertised. System detected vehicles arriving from the rear (cars, motorbike or even bike) when my bike was stationary or slowly moving - left or right fine. Also fast arriving vehicles with both LED displays activated.
Will add also some feedback later, after longer trip, so far I am happy with the product.
levs_denis
Member
Really a very good idea. You should find a way to sell your layout, it’s great, well done.
Thanks levs_denis.
Here is the post about Navigation holder without radar:
https://www.fjrforum.com/threads/gps-mount-3d-print.179445/
If anyone is interested, contact me by PM (I am OK to share CAD of my design for voluntary contribution to any FJR/3d print enthusiastic).
SkooterG
Purveyor of Crooked Facts
Nice. Well done.
That looks awesome! Nicely done sir.
