angus
Angus
Does anyone on this board run a J&M cb radio if so where did they mount there antenna.
J&M CB Radio
- Thread starter angus
- Start date
Help Support Yamaha FJR Motorcycle Forum:
RonBB
Well-known member
Picked up an antenna at a truck stop. You can use aluminum stock from Lowes or Home Depot to fabricate the support.
Last edited by a moderator:
Larry
Active member
I found mine on wingstuff, it has a bracket that uses the lic. mounting bolts, wire comes with a rubber grommet so that the wire hole is sealed. You also have the opitions of different legnth antennas. Did a 4000 mile trip with no problems
fjrchik
Just a girl in the world, having rode 3 FJRs
Antenna from Love's truck stop. Twisted a wrench to hold it all. Painted it black. Attached it behind the license plate. About $45 in it.
Last edited by a moderator:
I got the J&M license plate mount. Works great! I found that the 3 foot tuned for J&M antenna is best.
Steve
I was always worried that the load on the plastic fender would be too much when using something like a Firestick antenna.
fjrchik
Just a girl in the world, having rode 3 FJRs
have had 2 fjrs with that same set up now. no problems whatsoever. its really not that heavy.
angus
Angus
fjrchik
Just a girl in the world, having rode 3 FJRs
i have no idea. my neighbor/motorcycle buddy did both of my bikes. i would estimate 3-5 hours for someone experienced with doing this. longer, if not familiar. sorry i can't help ya more with that one.
Last edited by a moderator:
jorstin
Well-known member
I got one of J & m 1 foot antenna and mounted it to the license plate and made a slight bent in the bar and it tucks in nicely under mt GIVI v46
Steve
Steve
