Vance
Member
- Joined
- Nov 12, 2009
- Messages
- 13
- Reaction score
- 0
Just got a 2004 FJR as totaled my 2003. See my next post, Crash, Miracles still do happen. Need to make the darn thing loud as humanly possible. Any suggestions? Think Santa is going to get me a gift card to Let's Ride Motorsports so I can pick out my pipes. Should I also get a power commander? Don't know what I'm talking about so asking for help.
Has anybody checked out www.droptail.com, the
FJR1300 Auto-Exhaust Cutout Controller with Stealth Switch Accessory
from JSC Engineering. Has a remote that you can open it and close it, automatic after 5,000 RPM. The guys says louder than the Harleys. What's nice can turn it off for normal non-traffic riding.
Here was his email to me:
"You have to install (weld) a cutout valve flange for your cutout onto the bottom collector as my video shows. Our controller then controls it, and is also connected to your rpm and battery power if you want the automatic feature to work for high rpm. I find it useful to have the bike roaring when I run it up to high rpm, let alone make some more power if it is given more fuel and air. See this ebay ad for the exhaust cutout already welded on an FJR header.
That is the header I actually have on my bike. That price includes the controller and everything, a
bolt on. If sold, I would pull it off and make another. I will never be without this safety feature ever again, it has saved my ass more than once already. Tap my thumb, dial in the noise I need. I don't even take my eyes off the road.
I can't really recommend a cutout, this HPE are all I've had for any period of time due to their compactness, and
have had some reliability issues. Last only about two years. I am on my third motor, they're cheap enough. Heat
is the problem. Packaging seems to work, not sure of the others. There is clearance issues on sharp speed bumps,
have to crawl over them. Still, its been well worth it. DMH is another I've had in the shop for other customers, but
only for bench testing. They seem better built, and I like them better. Lots of bad California traffic here in L.A."
What is HPE and DMH. What only lasts for two years?
Anyway, let me know what you think guys!!!!
Safe Riding!!!!
Has anybody checked out www.droptail.com, the
FJR1300 Auto-Exhaust Cutout Controller with Stealth Switch Accessory
from JSC Engineering. Has a remote that you can open it and close it, automatic after 5,000 RPM. The guys says louder than the Harleys. What's nice can turn it off for normal non-traffic riding.
Here was his email to me:
"You have to install (weld) a cutout valve flange for your cutout onto the bottom collector as my video shows. Our controller then controls it, and is also connected to your rpm and battery power if you want the automatic feature to work for high rpm. I find it useful to have the bike roaring when I run it up to high rpm, let alone make some more power if it is given more fuel and air. See this ebay ad for the exhaust cutout already welded on an FJR header.
That is the header I actually have on my bike. That price includes the controller and everything, a
bolt on. If sold, I would pull it off and make another. I will never be without this safety feature ever again, it has saved my ass more than once already. Tap my thumb, dial in the noise I need. I don't even take my eyes off the road.
I can't really recommend a cutout, this HPE are all I've had for any period of time due to their compactness, and
have had some reliability issues. Last only about two years. I am on my third motor, they're cheap enough. Heat
is the problem. Packaging seems to work, not sure of the others. There is clearance issues on sharp speed bumps,
have to crawl over them. Still, its been well worth it. DMH is another I've had in the shop for other customers, but
only for bench testing. They seem better built, and I like them better. Lots of bad California traffic here in L.A."
What is HPE and DMH. What only lasts for two years?
Anyway, let me know what you think guys!!!!
Safe Riding!!!!