New Add-on extension for Givi SR357 rack owners

[garauld]

A fellow rider asked about the supersized Givi SR357 racks that I have built. When he said he already had a stock rack, I suggested I could probably design and build a similar supersized steel frame that he could then bolt onto his stock SR357. Below is the CAD prototype design I came up with. I am making these available to other riders as well. They will be powdercoated satin black but other colors are available. Cost is $180 plus S&H. Actual photos will be posted when available. If you buy one, you will need to notch the black plastic Monokey base with a Dremel so it will clear the lateral tubes - an easy job. PM me if you want to pursue.

 

[JamesK]

Looks like another great product in the making, very tempting

 

[Fred W]

What would be uber-cool would be a flat center plate that could be fitted with the appropriate hardware nubbins to make it Givi Mono-key compatible along with your side extension bars to make it soft bag friendly. That way one doesn't have to give up the Givi box capability to gain the larger soft bag platform.

I know... I always want to have my cake and eat it too.

 

[garauld]

It does work with the plastic Givi Monokey base plate. The four screws that hold the Monokey plate onto the Givi rack are used to attach the new extension. If you wanted a flat filler plate to replace the Givi base, then one can be supplied at a slight additional cost.