New member IrishMick

[IrishMick62]

Hello. Thrilled to join the group. Just got a 2006 FJR and the signals don’t work. Horn lights and windshield all ok. Any ideas

 

[RossKean]

Welcome from New Brunswick!!

1 - Check fuses
2 - Check switch
3 - Grounding issues (not an uncommon problem with early Gen II)

Usually, there are other symptoms also showing with a grounding fault (aka "spider" bite). Often, the headlight high beam indicator will be lit. Both signal light indicators on the dash dimly lit but no signals, glove box latch release doesn't work, windshield retract doesn't work. Sometimes wont start/run. Symptoms aren't consistent - depends on which multi-ground connector (spider) is affected and which feeds are interrupted.

If you don't have any of these things going on, I would focus on the fuses and switch (along with associated wiring).

Good luck.

 

[infrared]

IrishMick,

Welcome to the madhouse.! Pull up a seat, and be among friends.

At the risk of being obvious, since the bike is new to you, see if all turn signals do not work, first. You should have running lights ON when the bike is running. Try to see (visually) if the bulbs have one filament or two - the PO may have installed the wrong P/N bulbs. They should have two filaments inside. Check the fuses and flasher unit, Beyond that, it can be a deep dive, so hang tough, and maybe we can help.

 

[infrared]

In case you need an Owner's Manual, you can get them from Yamaha, or here (click the green DOWNLOAD button).
Owner's Manual

 

[fastpappy]

Welcome from the Big Apple and congrats on your new ride. Enjoy!

 

[tschutter]

Welcome from W MI. Enjoy the ride.

 

[bonyt]

Hello. Thrilled to join the group. Just got a 2006 FJR and the signals don’t work. Horn lights and windshield all ok. Any ideas

First thing I did when I bought my 07 last year is check with Yamaha if your bike has had the recall done to the ignition wiring and the spider bite issue. Just input your VIN. Best of luck.

 

[BlakeCG]

Welcome from SC! there is a lot of knowledge in this forum.

 

[infrared]

IrishMick,

In the USA, have your VIN in hand, and you can contact the Yamaha mothership directly, by phone or on-line:
Yamaha mother-ship
Yamaha customer service 1-800-962-7926
They will have the recall records for your FJR. The phone line is a real human, nice and chatty.

 

[FJRBluesman]

Welcome from SoCal Mick!

Keep us posted on what you discover on your turn signals not working.

 

[bonami00]

welcome from belgium

 

[bombay199]

welcome to the form