Obd2 elm327 mini

[ecc1124]

I recently had attempted to install a front tire and had the fork bearings on wrong side causing all kinds of error codes. Once I fixed the problem, all but the cel code is left on the dash. Just tried the fault code erase using torquepro app but can't clear issue. See attachment for codes. What am I not doing/musunderstanding?

 

[SkooterG]

You can't clear any of the fault codes using the app? Did you pay for the upgraded version with more functionality? I have never had any issues or problems clearing the fault codes using the app.

 

[Rocnsanman]

I know this may sound pretty basic but have you tried riding the bike for 25-30 yards? ABS, TC and CEL were all illuminated until I actually rode the bike.
Good luck

 

[ecc1124]

I know this may sound pretty basic but have you tried riding the bike for 25-30 yards? ABS, TC and CEL were all illuminated until I actually rode the bike.
Good luck

Been riding for awhile. Cel icon still on.

 

[VAcracker]

I’ve used an inexpensive ELM reader and EOBC-facile app.

I did pay a small amount for a partial unlock that has consistently worked for me. Pretty sure well under $20 and get to scan cars better too.

Had two bikes with Ivan’s flash and on occasion, maybe key turn on less than 100% before hitting the start the check engine light comes on.

 

[Rocnsanman]

Been riding for awhile. Cel icon still on.

Well, sorry I couldn't help.
Best of luck