gazza
Well-known member
Hi guys
I'm hoping someone here can help me with my problem.
A week ago my scoot started making a hell of a noise and i was thinking it was an exhaust issue. On looking at the exhaust all was fine and looking under the seat i see the PAIR valve had melted. I had tried looking for parts (Keeway) and see they were almost non existent so decided to remove all the junk associated with the PAIR valve. I also read the a hole in the cylinder head needed blocking off (exhaust i believe) and a vacuum feed on the inlet manifold needed to be blocked. Since doing this it's been a right pig and wont rev and is unrideable. I'm going to take a guess here and say that the carb may need re jetting but i'm not sure.
Hope someone here can shed some light fore me
Regards
I'm hoping someone here can help me with my problem.
A week ago my scoot started making a hell of a noise and i was thinking it was an exhaust issue. On looking at the exhaust all was fine and looking under the seat i see the PAIR valve had melted. I had tried looking for parts (Keeway) and see they were almost non existent so decided to remove all the junk associated with the PAIR valve. I also read the a hole in the cylinder head needed blocking off (exhaust i believe) and a vacuum feed on the inlet manifold needed to be blocked. Since doing this it's been a right pig and wont rev and is unrideable. I'm going to take a guess here and say that the carb may need re jetting but i'm not sure.
Hope someone here can shed some light fore me
Regards