Parts For Sale Parts for 2016ES

[FJR30FAN]

You have rear brake rotors?

 

[EddyRascal]

I do not.

 

[FJR30FAN]

Stator cover?

I do not.

Front rotors?

 

[EddyRascal]

One has a 45* bend in it. I don't know if the other one is straight. The front hub is not intact to be able to spin it to check the runout. I can take a look at it again tomorrow and see if I can figure out a way to check it.

 

[Renzo]

One has a 45* bend in it. I don't know if the other one is straight. The front hub is not intact to be able to spin it to check the runout. I can take a look at it again tomorrow and see if I can figure out a way to check it.

 

[Renzo]

PM sent on damaged bags..

 

[FJRJ]

Hello all. I have what is left from my 2016 FJR1300ES after I found a steel gate a year and a half ago. The front end is gone but it still has a lot of good parts. The engine is still in good shape with about 20k miles and I just had the transmission recall work done by my local dealer after the accident. I have the saddlebags that were damaged in the accident, but I have done a repair on the mounting hooks and used them for several months before the new bags for my 2022 came in. One does have serious cosmetic damage and is a little tricky to get open, but they work and I will sell fairly cheap as long as the buyer covers shipping. Let me know what you need and I will see if I still have it and will send you pics of the parts and what I need for it. I will be shipping from Bellingham, WA (98226).

Still have the rear rack?

 

[EddyRascal]

I do have the rear rack. I got the original rack for the 2016 when I got the bike with the GIVI trunk mount but never put it on. it is the original blue from the 2016 model. I paid $75 plus shipping for it and would like to get the same out of it.

 

[JoelTheMole]

Do you still have:

The front fender and is it mostly intact? Dont mind if it is scuffed or scratched up some.

The left vent cover?


The top nut that holds the ES fork damping adjusters in?

 

[EddyRascal]

I do not have any of the front suspension components left. I do have the side covers, but there were a few scuffs so I used some fine grit sandpaper to buff them out. I got sidetracked and never got around to finishing their rehabilitation. I am not sure if they could be just polished back to a shine or if painting would be required. I haven't looked at them in a while so I would need to check again to make sure all the plastic tabs are in 100% condition, although I am fairly certain they are fine. If interested, I can get some pictures to you.

 

[EddyRascal]

My front fender was totally obliterated. Recommend not running into a steel gate at 60mph.

 

[JoelTheMole]

I do not have any of the front suspension components left. I do have the side covers, but there were a few scuffs so I used some fine grit sandpaper to buff them out. I got sidetracked and never got around to finishing their rehabilitation. I am not sure if they could be just polished back to a shine or if painting would be required. I haven't looked at them in a while so I would need to check again to make sure all the plastic tabs are in 100% condition, although I am fairly certain they are fine. If interested, I can get some pictures to you.

If you could check I would appreciate that! A few skuffs or whatever are fine, my bike wont ever be close to perfect, but complete would be nice.

 

[MiSTer TwiSTer]

Do you still have:

The front fender and is it mostly intact? Dont mind if it is scuffed or scratched up some.

The left vent cover?
View attachment 8730

The top nut that holds the ES fork damping adjusters in?
View attachment 8729

Hello Joel
I have a 2014 red fender no cracks or breaks, but a lot of tiny rock chips. PM me if you’re interested. $75 + shp