Pathfinder's '05 Parting Out (Updated 4/10)

[101stpathfinder]

It doesn't seem right… this bike gave me 262k miles of pleasure then gets a small leak from a seal and I am

tearing it down and selling all my Gen. 1 farkles. I will keep a list of what is sold, you can likely assume that if it

is not on the sold list, it is available.

RDL (SOLD)

Lower Right side fairing piece (SOLD)

Shock (SOLD)

Forks (SOLD)

Ram Bone Mount (SOLD)

Rear Rim (SOLD)

Dash Shelf (SOLD)

Rear Stiffy Kit (SOLD)

Cox Radiator Guard (SOLD)

Motivation (No Cut) Sliders (SOLD)

Side Cases ('04) (SOLD)

Windscreens :

Cee Bal. +4h +2w with flip (SOLD)

Stock (SOLD)

Stock painted black on inside (SOLD)

Handle bar risers 1" UP (SOLD)

Handle bar risers Up & back (SOLD)

Front Stock Seat (SOLD)

Front Subframe (Stay) (SOLD)

Headlight Assembly (SOLD)

Front Plastic and "W" Windscreen Pc.(SOLD)

Fairing Plastics

Fuel Tank (Drilled and plumbed for Aux. Tank)

Side Cases ('05)

Ram Mounts (many)

Rear Stock Seat

(2) Stock grab rail/racks (1 new)

Helmet Guardian Dual Helmet locks for License plate frame (Looking for keys)

Stock Cans

OEM trunk mounting plate

OEM Top case (Damaged- yet fixable)

Engine Parts (Engine still complete)

Frame Pieces

Front Rim

Gages

Brake calipers

 

[b-bike393]

I am looking for a mounting system for my Garmin Zumo 550.
I'll take first dibs if one is available.

Maybe the Shelf too.

 

[blassoff]

PM sent for Plastics

 

[bajaleo]

I'd be interested in the rear brake caliper if:

A:. It's still available, and

B: It will fit my '07

Leo

It appears that the 2005 and the 2007 rear caliper assy's have different part numbers. Oh well

 

[ericboutin]

Interested in the radiator guard and the no cut sliders, when you know the prices for them. Thanks!

 

[NTXFJR]

Message sent on the triple clamps

 

[garyahouse]

You and I already talked about that upper left plastic last week. Will get back with you shortly on that.

Gary

 

[101stpathfinder]

You and I already talked about that upper left plastic last week. Will get back with you shortly on that.
Gary

I have almost all plastic off the bike - except the nose and upper L & R panels. I am thinking you might end up needing some welding done (?)

I have had the flimsy flange piece break off or crack no less than 4 times. My nephew did a good job on the last weld and it has held up.

When I get back from Texas, perhaps we should have a tech day and get your bike made whole again.

I am picking away at dismantling my '05.

 

[Asphalt Junkie]

PM sent

 

[garyahouse]

Trying to get the time to disassemble the FJR to inspect the damage. Had intended to do it several days ago, but just had a new septic drain field installed. Had to put everything on hold a few days while I diagnosed and struggled with a clogged septic system. That will be completed this morning. Have the bike in the workshop out back waiting for disassembly, but no lights out there. Had to cut my underground cable to make room for all the digging. Now that's done and I can redo my wiring and get the shop functional again.

Gary

 

[thomasgif]

PM sent for info on RDL and dash shelf

 

[08FJR4ME]

Oh, the horror of it all!

Sad to see it go. It was a good ride while it lasted I guess.

Dave

 

[101stpathfinder]

Dave, It was a GREAT ride !

Has done 9 10/10ths and 2 IBRs. 262k and still runs strong. If it were my only bike… I would fix it.

 

[CraigRegs]

Oh, the horror of it all!

Sad to see it go. It was a good ride while it lasted I guess.

Dave

And "last," it did!

 

[FlyingJ]

Hey Tony,

I'm interested in the rims. I will send you a PM.

 

[harpo]

I could really use the faring and head light. Send me a price and I'll send payment

 

[cheezsorce]

I would be interested in the radiator guard and the right side inner black fairing piece that covers half the battery.

 

[101stpathfinder]

OK, The forks, shock and RDL are sold. Forks and shock delivered and RDL shipped out.

Check for new parts and farkles available on original post.

Risers: Set of Up and a set of Up and Back.

Ram Bone mount

Dual Helmet lock (License Plate mounting)

Fuel Tank drilled and plumbed for aux. tank tie in.

Stiffy kit for rear end

Stock seat for sending in for build. (RDL - I would hope)

much more to come

……….

 

[PJ4863]

Pm sent on the helmet locks.