PDM60 Power Distribution - any feedback?

[dcarver]

Anyone running a Rowe Electronics PDM60? If so, comments good, bad, indifferent? Seems pretty trick. No fuses. Output configurable via application. Delay start and end run times configurable. 60 amp load. Configurable start up sequencing. $175 to $200 USD.

 

[ionbeam]

At $175 to $200 USD and an FJR rider you just might be a path finder. But don't look for many to follow too close after you, even if it does work well...

 

[RossKean]

There has been some discussion...

https://www.fjrforum.com/forum//index.php/topic/149297-pdm60/?hl=pdm60

https://www.fjrforum.com/forum//index.php/topic/152677-rowe-pdm-60-geoup-buy-interest/?hl=pdm60

Pretty cool device but, at least for me, not needed (especially for $200).

 

[dcarver]

At $175 to $200 USD and an FJR rider you just might be a path finder. But don't look for many to follow too close after you, even if it does work well...

Well, call me a path finder. Pulled the trigger. The idea of no fuses and alerts to shorts with auto disconnect is nice. Also the delay circuits.

There has been some discussion...
https://www.fjrforum.com/forum//index.php/topic/149297-pdm60/?hl=pdm60

https://www.fjrforum.com/forum//index.php/topic/152677-rowe-pdm-60-geoup-buy-interest/?hl=pdm60

Pretty cool device but, at least for me, not needed (especially for $200).

Good on yah, Ross! And thank you for not saying 'go search, dumb ass!'

 

[Queensland Ken]

The Eastern Beaver PC 8 works a treat, a fair amount cheaper as well.

 

[AlleyCat]

Love mine.... no fuses to worry about. Here is a pic of my install : https://s1317.photobucket.com/user/Alleycat711/media/PDM60.jpg.html