RAM mount

[Luis]

Does anyone know if this part can be mounted on the empty mirror frame? (just above the clutch or brake levers when you remove the plug)

RAM 2.25" x 0.87" Motorcycle Base with 11mm Hole and 1" Ball Product Number: RAM-B-252U

https://www.ram-mount.com/Gallery/images/RAM-B-252U/high/RAM-B-2522.jpg

It looks like this is a 9 0r 10mm bolt that will go in here...

There is another one: RAM Motorcycle Base with 9mm Hole and 1" Ball Product Number: RAM-B-272U

https://www.ram-mount.com/Gallery/images/RAM-B-272U/high/RAM-B-272.jpg

Although I think this may have a hole that is too small...

anyone knows?

Cheers

 

[Aasland]

IIRC the bolt is 10mm 1.25 thread pitch.

 

[TomInPA]

Your looking for...RAM Mount M10 x 1.25 Pitch Male Thread on 1 inch BallRAM-B-349U (also RAM-B-349)

 

[Luis]

Will it clear the master cylinder?

 

[puppychow]

FJR Mirror Hole RAM Mount discussion

 

[wfooshee]

And from that thread, another of my pictures, with the GPS mounted. Camera is resting on the top case.

That 349 ball has the exact thread required to go right into the mirror hole.

If you have one of the older FJRs with a mirror hole on the throttle side, that one is left-hand thread, and it won't go there. RAM doesn't have one for left-hand threads.