Gramps
Well-known member
Oooo I love donuts & beer.
I'll come to the bon voyage/tech party with a beer or two.
I'll come to the bon voyage/tech party with a beer or two.
Relocating to Iowa for work
- Thread starter Shane
- Start date
Help Support Yamaha FJR Motorcycle Forum:
Joe2Lmaker
Well-known member
I'll be stopping in.
I'll bring those items & make sure they clear the GIVI rack.
I'll bring those items & make sure they clear the GIVI rack.
wheatonFJR
...
<Homer voice> mmmmm...Donuts. </Homer voice>
Do you guys take call in questions from my garage via Skype?? :lol:
It should be about 33 degrees and raining...seems about right for some front caliper piston seal replacement and some seal/o-ring replacement forward of the U-joint. Neither of which I've done before.
Have a great time...and don't eat ALL the donuts. Save some for Shane.
Shane
Well-known member
Fantastic!
Nicey!
Skype? Sure! What's your handle?
Shane
Well-known member
Gramps
Well-known member
Hey Shane do you have an official start? I know you mentioned around 9am
you holding to that?
you holding to that?
Shane
Well-known member
9 seemed like a good time, in the absence of another suggestion.
Would you like to start earlier?
Shane
Gramps
Well-known member
Shane
Well-known member
carlson_mn
Well-known member
Anybody else plan on riding over to Shane's or am I the only crazy one? I only have a mile to go though 
.
.
Last edited by a moderator:
Gramps
Well-known member
I think will let you have that honor Matt.
carlson_mn
Well-known member
I guess it depends on how successful I am at getting both wheels off the bike tonight. That can be a bit tricky, if my memory is right, without a front end lift. I have done it several times, seem to remember putting weights into the trunk to get the front wheel off the ground after removing the rear. Kind of a balancing act after that.
My PR2 set will be here today....
My PR2 set will be here today....
See you folks after the conceal and carry class :vinsent: . noon "ish" or so I hope. Good times and save me a donut, I'll Bring the smoked fish and water wafers! :hyper:
Last edited by a moderator:
Shane
Well-known member
Floor jack with a board under the exhaust works well for this--makes the wheels unnecessary for weight carrying. It also helps to put a board under the center stand to get a bit of extra lift to work with.
Shane
radman
R.I.P. Our Motorcycling Friend
Might drag my sorry *** over, just to piss someone off.
wheatonFJR
...
carlson_mn
Well-known member
Floor jack with a board under the exhaust works well for this--makes the wheels unnecessary for weight carrying. It also helps to put a board under the center stand to get a bit of extra lift to work with.
Shane
Ah yes, I would have forgotten about the trick to put wood under the center stand. Now that I have single sided exhaust I will be thinking of how to prop up the back end... probably just use the swing arm. I will see you guys tomorrow morning, let me know if there's any garage supplies you need I'll donate something.
Shane
Ah yes, I would have forgotten about the trick to put wood under the center stand. Now that I have single sided exhaust I will be thinking of how to prop up the back end... probably just use the swing arm. I will see you guys tomorrow morning, let me know if there's any garage supplies you need I'll donate something.
Gramps
Well-known member
radman
R.I.P. Our Motorcycling Friend
Well, now I may not-at least until later. Just blew a rusted brake line on the 'ol Grand Marq, gotta fix that in the am.I'll be pissed you don't show.
wheatonFJR
...
That's all right, you'll still probably beat Gramps in.Well, now I may not-at least until later. Just blew a rusted brake line on the 'ol Grand Marq, gotta fix that in the am.I'll be pissed you don't show.
Similar threads
