s.ga.rider
Well-known member
I checked the bolts on my 14s bag locks today and all 4 were finger tight. Removed them and applied blue loctite. no more worries.
saddle bag lock friendly reminder
- Thread starter s.ga.rider
- Start date
Help Support Yamaha FJR Motorcycle Forum:
JSaul
Well-known member
I just re-applied loctite to mine after six years as one side was able to be loosened way to easy. I did both just to be safe.
steveoreno
Well-known member
Thanks for the reminder!
steveoreno
Well-known member
I'm hoping to avoid that status, lost a badge on my left saddlebag, replaced it then as another member so artfully posted I "wrestled her to the ground" on the left saddlebag of course.
Lowcountry Joe
Well-known member
Damn. Sorry to hear. Mine were not tight right out of the crate. They are now tight and locktited. PLUS I have added the pin mod as extra insurance. Did that on my 08 as well.
mcatrophy
Privileged to ride a 2018 FJR1300AS
The locks aren't even fitted "out of the crate". They are fitted to the cases by the dealer, the instructions to fit them are supplied with the cases and clearly state to use Loctite.
Of course, most dealers use monkeys to assemble new bikes, who can't (or won't) read.
Lowcountry Joe
Well-known member
I uncrated my bike, with the assistance of the owner of the dealership. I understand that the dealership assembles this ****, it was just a figure of speech to emphasize that again, the dealership didn't follow assembly instructions during the assembly process. I don't know why most of them miss this. Guess they figure they know everything with no need to read the instructions. Go figure.The locks aren't even fitted "out of the crate". They are fitted to the cases by the dealer, the instructions to fit them are supplied with the cases and clearly state to use Loctite.
Of course, most dealers use monkeys to assemble new bikes, who can't (or won't) read.
HaulinAshe
Well-known member
Yes, dealers do three things religiously during their $300 Dealer Prep... fail to Loktite the bag lock screws at all, Loktite them with RED high-strength so the bag can NEVER be serviced, and/or frequently fail to correctly engage the front ABS Housing notch.
Makes me never want to ride a new bike home. I'm terrified until I get my tools on it.
Makes me never want to ride a new bike home. I'm terrified until I get my tools on it.
Bill Lumberg
Merica
I loctited mine a while back. And fully intended to "pin" them. But there is not enough material in the bag "ears" to pin without drilling straight through the frame, which I won't do.
KrustyKush
Member
Maybe it is better that the children who assemble the new bikes don't use locktite on the little screws. That loctite stuff can do a number on plastics. My best guess is, if the child had a container of loctite sitting there, and dipped that tiny screw into it, he'd use WAY WAY too much, and get it all over the place. I'd just as soon do this myself. It does infuriate, though, that they charge so much for such crappy work. Yam might could solve the whole "problem" by putting the thread locker on the screws when they're produced. I've seen this before. Fasteners come with a dab of thread lock already on the threads, in a semi-dry state. Seeing how expensive a bag, set free, can be to replace, it would be a good move. OTOH, this bike is so utterly reliable, we wrench jockeys wouldn't be able to get much joy with our wrenches if all these little details were already taken care of.
s.ga.rider
Well-known member
HotRodZilla
GOD BLESS AMERICA
I wonder what would happen if someone lost a bag and then went after the dealer for not using Loctite on those screws. Ultimately, the dealer is supposed to follow the specs in the manual,and by ignoring the Loctite, they are allowing the screws to come out and the bag to fall off...
Just a thought.
Just a thought.
