I have a 2013 Gen3 FJR1300...
I'm trying to sort out which replacement windscreen suits a 5'6" rider - most everyone here appears to be much taller. I 'spoke' to one of our US cousins (Hello GreyGoose!
) who is the same height and has the VStream and likes it. I also contacted 2 manufacturers...
I've narrowed choices down to the VStream, CalSci, or Yamaha OEM Touring Screen, but still hoping to hear from riders of my, er, stature.
I'm trying to sort out which replacement windscreen suits a 5'6" rider - most everyone here appears to be much taller. I 'spoke' to one of our US cousins (Hello GreyGoose!
I'm a tad worried about the tinting for if/when I would have the screen fully up. Anyone have a tinted screen? The model recommended is the NS20308 https://shop.nationalcycle.com/perl/cycle/N20308National Cycles (VStream) reckons:"Being that you are on the shorter side, you would be looking through the tall shield in the lowest position. The mid-sized Sport Touring shield would be a better height.
This shield is only available in light tint. The tinting that we use in this shield is a very light smoke. It looks a little darker in the photo that is does in person. Unless you are holding this shield next to a clear shield its hard to notice the tinting."
I live in SE Australia - so it's hot and humid in Summer - however, I believe the Gen3 doesn't throw up as much heat onto the rider as the Gen2 model.CalSci says:The stock shield height is good for you, I think. Our sport model is about the same height as stock. You could try a medium, it's probably ok if you live in the northern half of the US.
I've narrowed choices down to the VStream, CalSci, or Yamaha OEM Touring Screen, but still hoping to hear from riders of my, er, stature.