Sena SMH-10 volume

[metalman]

I have acquired a Sena SMH-10 unit and installed it in my RF-1100 Shoei. The unit works as advertised with my 550 Zumo and iPhone 5s. The only thing that needs improvement for me is the Sena voice prompt volume. I have searched the manual, the Sena Help Forum and several M/C forums for how to increase the volume of the prompts but haven't found any info. Can this be done? If so, how? Any help appreciated.

 

[ahchiu]

The was a recent firmware update, go online to update your unit, this may help your voice prompt.

 

[HotRodZilla]

Is the master volume on your devices all the way up? Speakers or earbuds. If speakers, it may be speaker location.

 

[metalman]

Checked the firmware update…its the most recent. Hotrod, the prompts I have difficulty with are the ones such as "speed dial"…..the ones driven by the Sena unit itself, not the Bluetooth devices. I have also moved the speakers to the loudest location (I was surprised at what a difference a small change in location made). Still can't hear the prompts at speed.

 

[phroenips]

The voice prompts has it's own, separate volume level (separate from bluetooth, etc). It can be adjusted via the main dial, but the trick is to do it during a voice prompt. I find it easiest to adjust when I first turn it on, and she says "Hello...phone connected"

 

[metalman]

The voice prompts has it's own, separate volume level (separate from bluetooth, etc). It can be adjusted via the main dial, but the trick is to do it during a voice prompt. I find it easiest to adjust when I first turn it on, and she says "Hello...phone connected"

Aha, exactly what I was looking for ……. many thanks!