These cans have been sold!!
Set of Dale Walker Holeshot Performance Products Slip-on exhaust cans. Polished stainless steel. No dB killers, but they can be purchased an installed if desired.
Read all about these cans, and hear watch/listen to some videos of how they sound at Dale Walker's web site
A friend bought a used '04 and these were on it. He wanted to go back to stealthy quiet stock mode, so these came off and are now up for sale. The bike has 10k miles, but these have not been on that long.
They are in good presentable condition as can be seen in pics below. Some light scratching at the edges of the band clamps, and one small scrape on the inside of the left side can. Pictures accurately represent these minor flaws, neither of which can be seen when the cans are installed on the bike.
These cans will definitely fit 1st and 2nd gen bikes. Not sure about 3rd gens, but I bet they do. You could always give DW a call to be sure. You do not need to retune the fuel injection system to use these if you just slip them on your stock header, but may get the best horsepower results if you do.
Light scratches under the band clamps (not to be confused with that one time... at band camp)
And one small scrape on inside of left can
These cans go for $680 new. I'd like to get $375 plus actual shipping. I will disconnect the mid pipes and pack everything up as small as possible, but well protected. Shipping should not be too exorbitant via UPS. Shoot me a zip code for an estimate.
Set of Dale Walker Holeshot Performance Products Slip-on exhaust cans. Polished stainless steel. No dB killers, but they can be purchased an installed if desired.
Read all about these cans, and hear watch/listen to some videos of how they sound at Dale Walker's web site
A friend bought a used '04 and these were on it. He wanted to go back to stealthy quiet stock mode, so these came off and are now up for sale. The bike has 10k miles, but these have not been on that long.
They are in good presentable condition as can be seen in pics below. Some light scratching at the edges of the band clamps, and one small scrape on the inside of the left side can. Pictures accurately represent these minor flaws, neither of which can be seen when the cans are installed on the bike.
These cans will definitely fit 1st and 2nd gen bikes. Not sure about 3rd gens, but I bet they do. You could always give DW a call to be sure. You do not need to retune the fuel injection system to use these if you just slip them on your stock header, but may get the best horsepower results if you do.
Light scratches under the band clamps (not to be confused with that one time... at band camp)
And one small scrape on inside of left can
These cans go for $680 new. I'd like to get $375 plus actual shipping. I will disconnect the mid pipes and pack everything up as small as possible, but well protected. Shipping should not be too exorbitant via UPS. Shoot me a zip code for an estimate.
Last edited by a moderator:
![fjackets Real Lambskin Leather Biker Jacket — Quilted Cafe Racer Zip Up Moto Leather Jackets For Men | [1100085] Johnson Brown, XL](https://m.media-amazon.com/images/I/41I7Pm1f+vL._SL500_.jpg)
