Starter Button wiring question

[Greenham]

Does anyone happen to know the In/Out wiring combination for the starter button. Not the kill switch just the momentary contact starter button.

 

[n2osx]

The power goes in on a White/Blue wire and then grounds with a Black wire right at the switch.

 

[mcatrophy]

Don't understand the question. There are two wires, black (ground) and blue/white (or white/blue depending on which side of the connector). Join them to start, release when started.

 

[Greenham]

So the switch just provides the momentary "ground" to the starter relay.

Thanks guys. That is helpful