mehaffydr
Well-known member
Well after getting this fine piece of work known as the Tanji FBFC i needed to rethink my rear trunk options. So after much research I decided to go with the Pelican 1550. I wanted to make this easily removable to take in at night. That was proving difficult and then Renojohn showed me this Softbag that is made to fit inside the Pelican case. So this seemed the perfect solution I could securly mount the Pelican and take the contents in at night. I do loose a little capacity but I think the tradeoff is worth it.
Tanji and Pelican finished
I bolted these AL. straps to the fuel cell and then drilled throughthe Pelican and drilled and tapped the AL. and screwed down through the Pelican into the AL. bar stock with 8 mm screws.
Screws holding Pelican. This thing is solid if I move it the bike moves.
Here's the soft case in the Pelican
Inside view. Already started packing for the IBR
Rear View.
Tanji and Pelican finished
I bolted these AL. straps to the fuel cell and then drilled throughthe Pelican and drilled and tapped the AL. and screwed down through the Pelican into the AL. bar stock with 8 mm screws.
Screws holding Pelican. This thing is solid if I move it the bike moves.
Here's the soft case in the Pelican
Inside view. Already started packing for the IBR
Rear View.
Last edited by a moderator: