Imp
Well-known member
I just changed the thermostat and found that it did not close all the way due to corrosion. I think it was due to my lack of coolant change. I went by the 2 year coolant change recommendation (the little booklet) and not by the yearly change intervall recommended by the forum.
The problem was that it was cooling too much and did not warm to the 4 bar range (2nd gen) which is the usual temp while riding, it would go down to 0-2 bars while going 50 -70 mph. This would occur during cool weather 30-50's, it would heat up to the 7 bar mark quickly during city riding during warmer and take longer and longer to cool down.
I used Honda pre mixed to change the coolant. This was my first change since I got the Feejer in Oct 08. It has 48,883 miles on it now. Thought I should share the info.
Oh by the way the way the 08 reservor has to be taken off to get the coolant out, is no big deal since one just has to unbolt 2 bolts.
The problem was that it was cooling too much and did not warm to the 4 bar range (2nd gen) which is the usual temp while riding, it would go down to 0-2 bars while going 50 -70 mph. This would occur during cool weather 30-50's, it would heat up to the 7 bar mark quickly during city riding during warmer and take longer and longer to cool down.
I used Honda pre mixed to change the coolant. This was my first change since I got the Feejer in Oct 08. It has 48,883 miles on it now. Thought I should share the info.
Oh by the way the way the 08 reservor has to be taken off to get the coolant out, is no big deal since one just has to unbolt 2 bolts.