I was PM'd about whether it was a good idea to change the oil after a track day. Typical situation where there are a variety of opinions. Here's mine.....
I would recommend an oil change after a track day. Running on the track will really heat the oil up due to the extended high RPM/high load operation. That shortens the oil life considerably regardless of what sort of oil you are using.
The ZDP in the oil does double duty as an anti-oxidant as well as an anti-wear agent. More than normal ZDP depletion will result from the extended hi temp operation providing oxidation protection resulting in less wear protection later on and shortened oil life before the next change. Changing the oil is cheap insurance.
It is really hard to predict just how much life you might take out of the oil with a track day or two so just change it. That is the sort of case where I would just drain the sump and refill with fresh oil and leave the filter for the next change. If the deal was for a weekend don't worry about two track days and then the ride home. Just change it when you get home. One thing you can do at a track day is to keep that cooking thermometer with you and stick it in the sump thru the fill port when you come in after a session to see how the oil temp looks. It will give you an idea if you are seriously get it hot or not.
Regarding oil temps: 250-270 F is no problem at all. 280-300 is getting pertty warm. Up to 305 is acceptable but the oil life is getting shortened very quickly at 305 and above. If the oil is running 305 on every track session then synthetic would be a good idea maybe........
One indicator of trouble is if the oil appears excessively thick the next day after high temping it. Usually, if the oil is overtemped it will be fine for that heat cycle but will thicken excessively when it cools down and appear more viscous after sitting overnight. If you observe this or excessive darkening of the oil in a short time then changing it is advisable.
I'll let the admins put this subject in the proper category........
I would recommend an oil change after a track day. Running on the track will really heat the oil up due to the extended high RPM/high load operation. That shortens the oil life considerably regardless of what sort of oil you are using.
The ZDP in the oil does double duty as an anti-oxidant as well as an anti-wear agent. More than normal ZDP depletion will result from the extended hi temp operation providing oxidation protection resulting in less wear protection later on and shortened oil life before the next change. Changing the oil is cheap insurance.
It is really hard to predict just how much life you might take out of the oil with a track day or two so just change it. That is the sort of case where I would just drain the sump and refill with fresh oil and leave the filter for the next change. If the deal was for a weekend don't worry about two track days and then the ride home. Just change it when you get home. One thing you can do at a track day is to keep that cooking thermometer with you and stick it in the sump thru the fill port when you come in after a session to see how the oil temp looks. It will give you an idea if you are seriously get it hot or not.
Regarding oil temps: 250-270 F is no problem at all. 280-300 is getting pertty warm. Up to 305 is acceptable but the oil life is getting shortened very quickly at 305 and above. If the oil is running 305 on every track session then synthetic would be a good idea maybe........
One indicator of trouble is if the oil appears excessively thick the next day after high temping it. Usually, if the oil is overtemped it will be fine for that heat cycle but will thicken excessively when it cools down and appear more viscous after sitting overnight. If you observe this or excessive darkening of the oil in a short time then changing it is advisable.
I'll let the admins put this subject in the proper category........
Last edited by a moderator: