TwinMax

[Zoom Zoom]

Gents:

FJR 2006 10 K miles

I have a TwinMax Throttle body sync. But,It only has 2 hoses which are suited for twin bikes like BMW oilheads

How can I use it on an FJR?

Beat regards

ZZ

 

[wfooshee]

You could try it by deciding that one of the tubes is on a "standard" cylinder and leave it there. Move the other one among the other three cylinders and match them to that one. Common practice is #3 is the one you match the others to. Leave the caps on the vacuum taps you are not connected to, of course.

 

[RadioHowie]

Hook one of the two hoses up to the TBS port on throttle body #3.

Then, one at a time, to #1, #2 and #4, syncing each TB to match #3.

 

[wfooshee]

Didn't I just say that?

Mebbe we was typing at the same time simultaneously together at once.

 

[RadioHowie]

Didn't I just say that?
Mebbe we was typing at the same time simultaneously together at once.

The difference is, besides the 60 seconds posting time, is that I'm talking out my ass.....YOU know what you're talking about.

 

[JamesK]

Didn't I just say that?
Mebbe we was typing at the same time simultaneously together at once.

Since you two have already expressed the answer in about every way possible in English, I figured I'd add some foreign language versions

Spanish

Usted podría intentarlo decidiendo que uno de los tubos está en un " standard" el cilindro y sale de él allí. Mueva el otro entre los otros tres cilindros y emparéjelos aquél. La práctica común es #3 es la que usted empareja las otras a. Deje los casquillos en los golpecitos del vacío que usted no está conectado con, por supuesto.

German

Sie konnten es versuchen, indem Sie entschieden, dass einer der Schläuche auf einem " ist; standard" Zylinder und verlassen es dort. Verschieben Sie das andere unter den anderen drei Zylindern und passen Sie sie an diesen an. Handelsbrauch ist #3 ist der, den Sie die anderen an anpassen. Lassen Sie die Kappen auf den Vakuumhähnen, die Sie nicht an angeschlossen werden, selbstverständlich.

French

Vous pourriez l'essayer en décidant qu'un des tubes est sur un " ; standard" ; le cylindre et partent de lui là. Déplacez l'autre parmi les trois autres cylindres et assortissez-les à celui-là. La pratique commune est #3 est celle que vous assortissez les autres à. Laissez les chapeaux sur les robinets de vide que vous n'êtes pas relié à, naturellement.

Blame Yahoo Bablefish if these are wrong

 

[rockmurf]

ok James, that is enough showing off for today, tomorrow and the rest of the month.

 

[wfooshee]

It's already the end of the month. Let's include next month!