Vista Cruise modification

[rtsangelo]

For anyone attempting to install the Vista Cruise throttle lock using the "fits most Hondas" method, it is not necessary to trim the collar on the hand grip.

Using a dremel tool, you can modify the V/C enough to allowance clearance between the V/C and the hand grip collar, thus leaving a cleaner install appearance.

I also discovered another issue with the V/C that I haven't seen addressed on this board.

My V/C had a tendency to disengage on it's own after about 10 seconds or so. (even after multiple adjustments to the nut/screw/whatever)

I was able to fix this by doing some simple filing. here is a photo showing the mods.

#1 is the area I ground off with a dremel tool to allow clearance for the grip collar

#2 is the area of the VC that I filed to increase the area so the VC would not disengage on its own. I just used a metal file to do this one.

Also, this is the link to the original idea on how to install the VC using the "fits most hondas" version of the V/C.

https://www.fjrforum.com/forum//index.php?s...mp;#entry100014

Ralph

Update. I posted photos to show the above and they uploaded, but they have since disappeared from the post?

 

[FJRMGM]

Ralph, I have the same problem problem with my V/C disengaging.

Can you just explain where you filed to get it to work?

If you have pictures - I pm'ed you with home address.