Voltage Regulator Output Connector

[sidejack]

The OEM connector to the Voltage rectifier/regulator on my 2009 is toast -- there is no longer a solid positive connection from the cable/connector to the regulator. Yamaha has NO replacement -- Trying to find a replacement (rather than replace the entire wiring harness? -- ouch)

Any ideas? Thanks

 

[SLK50]

Maybe these guys can help you out:

https://www.cycleterminal.com/motorcycle-connectors.html

 

[JamesK]

Eastern Beaver has the Furukawa QLW connectors that you need.

https://easternbeaver.com/Main/Elec__Products/Connectors/R-R_Connectors/r-r_connectors.html

As well as complete kits to replace the crappy OEM wires, which after a few years progressively fail resulting in the battery not getting sufficiently charged.

 

[Chiefblueman]

https://www.roadstercycle.com/

Go down the page a little way to "Yamaha FJR Custom Built Upgrade Harness". Connector w/wiring, fuse or circuit breaker. Charge line directly to battery. Works a treat!

 

[Panman]

I called Jack at ROADSTERCYCLE.COM and he has a harness all set up.

$45

Carver had an issue and found this guy, Loping around my FJR wouldn't keep the heated gear or grips running now everything runs at a idle.

 

[dcarver]

Yep!

 

[SunRider]

When the Rec/Reg connector pair failed on my Aprilia, I just cut them off and soldered & shrinked wrapped the wires.

Connectors are great if you are carrying a spare Rec/Reg on a trip, otherwise I have felt no need to rewire new ones in.