smokinjryan
Active member
Let me know what you got .
-
If you have bought, sold or gained information from our Classifieds, please donate to FJRForum and give back.
You can become a Supporting Member or just click here to donate.
wtb bar risers, wild bill highway pegs for gen2
- Thread starter smokinjryan
- Start date
Help Support Yamaha FJR Motorcycle Forum:
K Rider
Well-known member
I have the original Heli riser plate (HRT076). It is not the HRT076-2. I believe this to be the specs
found it online)
Tour Performance® HR Triple Clamp for 2006-2007 Yamaha FJR1300A/AE
“Super Bike Performance – Touring Bike Comfort™”
1. 38mm (1 ½”) rear offset handlebar mounts re-positions the handgrips and controls 1 ½” closer to the rider for greatly improved long distance riding. Stock height has been maintained for a comfortable yet sporty feel.
2. Greatly increased fork rigidity from thicker cross section design. Tighter steering stem- to - bore clearance, and dual 8mm fork tube pinch bolts.
3. Reduced vibrations felt in the hand grips.
4. All stock hydraulic lines, cables and control housing wire looms are retained and provide proper slack when bars are moved from full left to right stops.
5. Two threaded holes located behind the ignition switch are provided to mount one or two ram ball mounts. Additional design provisions have been engineered into the HR Triple Clamp design for future accessory mounting.
Bought them thinking they were the newer version. They aren't in perfect condition so I could sell them fairly cheap. PM me if interested.
found it online)Tour Performance® HR Triple Clamp for 2006-2007 Yamaha FJR1300A/AE
“Super Bike Performance – Touring Bike Comfort™”
1. 38mm (1 ½”) rear offset handlebar mounts re-positions the handgrips and controls 1 ½” closer to the rider for greatly improved long distance riding. Stock height has been maintained for a comfortable yet sporty feel.
2. Greatly increased fork rigidity from thicker cross section design. Tighter steering stem- to - bore clearance, and dual 8mm fork tube pinch bolts.
3. Reduced vibrations felt in the hand grips.
4. All stock hydraulic lines, cables and control housing wire looms are retained and provide proper slack when bars are moved from full left to right stops.
5. Two threaded holes located behind the ignition switch are provided to mount one or two ram ball mounts. Additional design provisions have been engineered into the HR Triple Clamp design for future accessory mounting.
Bought them thinking they were the newer version. They aren't in perfect condition so I could sell them fairly cheap. PM me if interested.
smokinjryan
Active member
just bought standard 1" risers we will see how that goes....still holding out for highway pegs
