Looking for a list of stock tools

Nikk · Apr 14, 2008

Hi All,

I had a shop day with some other Yamaha and Aprilla riders. Tools were flying all around the garage and now I'm looking at whats left in my stock tool bag and wondering ..... is that all of it. I've searched for a list of the stock tool set but no luck.

Any help would be appreciated.

-Nik

mcatrophy · Apr 15, 2008

QUOTE (Nikk @ Apr 15 2008, 04:38 AM) <{POST_SNAPBACK}>
I'm looking at whats left in my stock tool bag and wondering ..... is that all of it. I've searched for a list of the stock tool set but no luck.
-Nik
Nik -

This is a photo I took of the supplied toolkit of my '06. The hex keys are 4mm and 6mm. Hope that helps.

odot · Apr 15, 2008

Them plyers on the left are the cat's ***.....I took them out of the kit and use them at work.....they are so top notch.

feejer222 · Apr 15, 2008

odot said:
Them plyers on the left are the cat's ***.....I took them out of the kit and use them at work.....they are so top notch.

Is that similar to the dogs bollocks?

user 8909 · Apr 15, 2008

two things I'm disappointed with are the saddle bags and this useless tool kit. if anyone has made repairs on the side of the road with this hand full of line sinkers I'd like to know what.

I'm going to replace it with a tire plugger kit, a and quarter.

I just spent $32.00 for a 19mm long arm allen wrench to remove the front wheel, I must have been dreaming when I thought there might be a tool in the kit to take a wheel off.

vectervp1 · Apr 15, 2008

feejer222 said:
odot said:

Them plyers on the left are the cat's ***.....I took them out of the kit and use them at work.....they are so top notch.

Click to expand...

Is that similar to the dogs bollocks?

Quite similar, only the dogs bollocks are metric.

odot · Apr 15, 2008

I'm sure the canucks have another saying for it.....probably has something to do with seals or caribou or somthing.

abarron576 · Apr 15, 2008

The pliers are useless- they are NOT metric! I replaced them with metric pliers and a metric crescent wrench.

:clapping:

wfooshee · Apr 15, 2008

KIEEFER said:
I just spent $32.00 for a 19mm long arm allen wrench to remove the front wheel, I must have been dreaming when I thought there might be a tool in the kit to take a wheel off.

Maybe a bit late for you but hopefully good for somebody seeing it, but I found a spark plug socket at Sears, 5/8", the hex top is (ta-da!) 19mm. (Actually SAE, but microscopically close enough to 19mm) And. . . the drive hole is square all the way through the top end of the socket. Yank the rubbr boot out of it, put a 3" extension through the inside of the socket, and you have a 19mm hex key! 4 bucks for the socket.

FJRGuy · Apr 15, 2008

odot said:
I'm sure the canucks have another saying for it.....probably has something to do with seals or caribou or somthing.

Was just pullin the FJR out of the Igloo thinkin' a track drive for the rear and a ski on the front would make this machine the 'seal's blubber'!

Would it be considered a hi-jack if I asked what people think should be added and/or replaced on the stock kit?

vectervp1 · Apr 15, 2008

FJRGuy said:
odot said:

I'm sure the canucks have another saying for it.....probably has something to do with seals or caribou or somthing.

Click to expand...

Was just pullin the FJR out of the Igloo thinkin' a track drive for the rear and a ski on the front would make this machine the 'seal's blubber'!

Would it be considered a hi-jack if I asked what people think should be added and/or replaced on the stock kit?

Replace everything, and add alot!

I carry a small assortment of tools with me ranging from your typical tools (screwdriver, pliers) to some more 'advanced' tools (butane soldiering iron). I try to keep enough tools on me to to minor to moderate repairs on the road if I have to. So far, I haven't needed some of the tools, but its nice to know that I have them there.

odot · Apr 15, 2008

"Seal's blubber"? You ain't even close to any seals there in alberta. Now, iffn you was from the yukon territory...I might believe ya.

Nikk · Apr 15, 2008

mcatrophy said:
Nikk said:

I'm looking at whats left in my stock tool bag and wondering ..... is that all of it. I've searched for a list of the stock tool set but no luck.-Nik

Click to expand...

Nik -

This is a photo I took of the supplied toolkit of my '06. The hex keys are 4mm and 6mm. Hope that helps.

mcatrophy -

Thanks huge for the pic.!!!! That was awesome! To my surprise it looks like I still have all my tools! Now I just need to improve the kits utility; but that is a different thread.

Thanks again!

-Nik

mike25 · Apr 15, 2008

Maybe a bit late for you but hopefully good for somebody seeing it, but I found a spark plug socket at Sears, 5/8", the hex top is (ta-da!) 19mm.

Better buy a socket with a 3/4 hex if your looking for 19MM.

Nikk · Apr 15, 2008

Does anyone have a part number for this Sears spark plugs socket with a 19mm end?

Joe2Lmaker · Apr 15, 2008

Nikk said:
Does anyone have a part number for this Sears spark plugs socket with a 19mm end?

It's not just a Sears thing.

also, keep in mind that 19mm is 0.74803 inches. That's the same as a 3/4" hex socket to you and me

Bustanut joker · Apr 15, 2008

odot said:
"Seal's blubber"? You ain't even close to any seals there in alberta. Now, iffn you was from the yukon territory...I might believe ya.

Figgers, Bearly flyins on the road when we need a sarcastic canook response.

I tossed the whole kit an bought "real" ****. That stamped stuff makes for good cussin material. <_<

:jester:

wfooshee · Apr 15, 2008

My socket is Craftsman #34671. What makes it different is that the 3/8" drive square goes all the way through to the inside of the socket, there's not a smaller round hole at the top of the well. Most of the sockets I've seen won't let you stick the extension in from inside.

FJRottie · Apr 15, 2008

"Seal's blubber"? You ain't even close to any seals there in alberta. Now, iffn you was from the yukon territory...I might believe ya.

Them thar westernucks are closer to the praire oysters.

Looking for a list of stock tools

Help Support Yamaha FJR Motorcycle Forum:

Well-known member

Privileged to ride a 2018 FJR1300AS

CC member # 17,----- DUP member # 7, mensa club m

Well-known member

Genlll SS

Well-known member

CC member # 17,----- DUP member # 7, mensa club m

Well-known member

O, Woe is me!!

FJR Rally Addict! :D

Well-known member

CC member # 17,----- DUP member # 7, mensa club m

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

O, Woe is me!!

Independent

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!