Which bar riser plate?

RoadRunner244 · May 4, 2011

Hello everybody. This forum is mind bending! I’m new to posting but have been lurking, reading and learning for awhile. I can’t imagine a group more informative and helpful than those of you who post here. About a year ago I began thinking about filling an empty slot in my garage with an FJR. From my time spent here I just about everything I wanted to know about the machine has been covered. I was so impressed that I just jumped up and got myself a black beauty—2008. Smooooth! Faaaaast! Have only been able to get a few good rides in on it and love it so far. Only issue so far is neck/shoulder pain from the riding position. This is not new, had the same problem with a cruiser until I was able to get the bars up and back through a couple of adaptations. I know I am going have to do something with the FJR bars. It’s seriously painful. After researching risers vs. plates I’m looking at 2 riser plates — [Violation of rule 10] and Helibars. The only difference I see is [Violation of rule 10] rise is 1 ½ inches vs. Helibars rise of only ½ inch. I am trying to get as much up and back as possible while keeping the stock control cables. Any input I can get of why one or the other is much appreciated. I did searches and couldn’t find any comparisons of the two, but if I missed it apologies in advance.

Rheal · May 4, 2011

RoadRunner244 said:
Hello everybody. This forum is mind bending! I’m new to posting but have been lurking, reading and learning for awhile. I can’t imagine a group more informative and helpful than those of you who post here. About a year ago I began thinking about filling an empty slot in my garage with an FJR. From my time spent here I just about everything I wanted to know about the machine has been covered. I was so impressed that I just jumped up and got myself a black beauty—2008. Smooooth! Faaaaast! Have only been able to get a few good rides in on it and love it so far. Only issue so far is neck/shoulder pain from the riding position. This is not new, had the same problem with a cruiser until I was able to get the bars up and back through a couple of adaptations. I know I am going have to do something with the FJR bars. It’s seriously painful. After researching risers vs. plates I’m looking at 2 riser plates — [Violation of rule 10] and Helibars. The only difference I see is [Violation of rule 10] rise is 1 ½ inches vs. Helibars rise of only ½ inch. I am trying to get as much up and back as possible while keeping the stock control cables. Any input I can get of why one or the other is much appreciated. I did searches and couldn’t find any comparisons of the two, but if I missed it apologies in advance.

I believe helibars also have an optional set of risers that raise the bars a total of 1 3/4" and back ??? (douple check on their site please). The helibars and optional risers install with using the standard cables. Helibar users tend to love them from what I hear. I've just ordered a set of GenMar risers fro my '09 model. I opted for theses because they are much easier to install, and because I know users very much appreciate these as well. I think most or at least many FJR owners add some type of risers.

Rheal

Nikk · May 4, 2011

Check out redlunaracing. and this thread.

RPrice · May 4, 2011

RoadRunner244 said:
Hello everybody. This forum is mind bending! I’m new to posting but have been lurking, reading and learning for awhile. I can’t imagine a group more informative and helpful than those of you who post here. About a year ago I began thinking about filling an empty slot in my garage with an FJR. From my time spent here I just about everything I wanted to know about the machine has been covered. I was so impressed that I just jumped up and got myself a black beauty—2008. Smooooth! Faaaaast! Have only been able to get a few good rides in on it and love it so far. Only issue so far is neck/shoulder pain from the riding position. This is not new, had the same problem with a cruiser until I was able to get the bars up and back through a couple of adaptations. I know I am going have to do something with the FJR bars. It’s seriously painful. After researching risers vs. plates I’m looking at 2 riser plates — [Violation of rule 10] and Helibars. The only difference I see is [Violation of rule 10] rise is 1 ½ inches vs. Helibars rise of only ½ inch. I am trying to get as much up and back as possible while keeping the stock control cables. Any input I can get of why one or the other is much appreciated. I did searches and couldn’t find any comparisons of the two, but if I missed it apologies in advance.

Roadrunner 244,

Boy you are really smart to organize your question this way, otherwise you'd get blasted "outa here" for even alluding to (Violation of rule 10). I wish I could help you! I installed the "blocks" that raise the handlebars about 1.2 inches and bring them back slightly. Works great for me, I'm 6'2" with a 34" inseam (long torso). I rode the bike stock for a year, and finally made this mod, and it works fine, not earth shattering, just takes a bit of pressure off during long trips. I assume you've researched the "Master Yoda" riding position?? If not, do this first................ then apply it..............then decide if you need the handlebar position changed. I'm 'jes sayin', because if I don't say it, a bunch of others will.

Good Luck!

RoadRunner244 · May 4, 2011

WHOA! Had to look up that rule... Guess I stepped in it, but, now I have to admit a vague recollection of reading about some issue with the individual a long while back. It just didn't register when I posted. Got it now. Guess I should (re)search the issue so I can make an informed decision. Yes, I practice "Master Yoda". It is taking a bit of practice and concentration until it is a more second nature kind of thing. Haven't 'mastered' it yet but am working on it. It helps, but still need to bring myself more upright with risers or something of the sort. Thanks for your response.

RoadRunner244 · May 4, 2011

Thanks, Rheal. Will check that out. Somehow I have been under the impression that, although more complicated to install, riser "plates" allow the most upright position. That may be wrong, I just don't know. I've looked at various risers, and called Helibars but have to say I didn't get a real clear description/explanation in what the their various products do insofar as providing the most upright position.

zed88 · May 4, 2011

Can someone post a good link to the master yoda riding position?

RoadRunner244 · May 4, 2011

It seems most if not all links to the original have been wiped. Try this ["https://www.my-mc.com/messages/31335/Riding_Position-555-60607.doc"] It’s a document download for the technique as it applies the BMW RS bikes but you can pretty much gather how to apply to the FJR. (Sorry, haven't figured out the 'Insert Link' thing yet.)

RPrice · May 5, 2011

zed88 said:
Can someone post a good link to the master yoda riding position?

Zed 88,

I found a thread talking about the Master Yoda position on the BMW Sport Touring Forum. Here's the "outline" from a post on that thread:

"REALLY, MYRP is about riding ANY bike.

Bend torso at hip joint, not waist

Butt behind feet

Support with foot pressure from the BACK of thighs

Back with slight arch

Shoulders back

Elbows bent

(Forearms as closely level to ground as possible)

No weight on bars.

All that changes from bike to bike about THAT is torso angle."

This pretty much sums it up. If you've ridden horses or had lessons you know that you ride with your back straight, bending forward at the hips, not the waist, and not "slouching". Your back should actually feel "convex" in shape. (Your belly button pushed forward over your hips). Use your thighs/legs to support your torso.

It's really pretty easy, and when you do it right you will not be putting any pressure on the bars. For me the secret was making sure my back was in the right position (no slouching!). It does take practice but it's not that hard to train yourself. When you catch yourself "leaning" on the bars, you're not doing it right!!

I hope this helps a little.

Bounce · May 5, 2011

RPrice said:
Roadrunner 244,Boy you are really smart to organize your question this way, otherwise you'd get blasted "outa here" for even alluding to (Violation of rule 10).

actually, he DID get his warn level raised (like anyone would) and the original content removed per rule 10. a warn isn't a time out until there's a chronic problem. a time out isn't a ban until the time outs become chronic. there are exceptions to this which typically involve someone displaying exquisite skills in being ******* about somehow being outside of the posted rules. RR was none of these at any time.

charismaticmegafauna · May 5, 2011

RoadRunner244 said:
...had the same problem with a cruiser until I was able to get the bars up and back through a couple of adaptations. I know I am going have to do something with the FJR bars. It’s seriously painful.

The answer...?:

RZ350 · May 5, 2011

RR244, I felt your pain - until I swapped out the handlebars completely. I had to flatten those bars out and pull them back to get them comfortable. But it was a big job, one that you can read about here in detail if you wish (Helibar Mod)

I'm glad I spent the time though, as it opens the door to other farkles, such as a truly "usable" driver's backrest. (I guess I'm more on the "touring" side of the "sport-touring" lately

)

Patriot · May 5, 2011

eezy peezy

trade that POS Gen II in for Gen I and you can immitate my solution(s)

:yahoo:

RPrice · May 6, 2011

Bounce said:
RPrice said:

Roadrunner 244,Boy you are really smart to organize your question this way, otherwise you'd get blasted "outa here" for even alluding to (Violation of rule 10).

Click to expand...

actually, he DID get his warn level raised (like anyone would) and the original content removed per rule 10. a warn isn't a time out until there's a chronic problem. a time out isn't a ban until the time outs become chronic. there are exceptions to this which typically involve someone displaying exquisite skills in being ******* about somehow being outside of the posted rules. RR was none of these at any time.

Bounce,

OK, yeah, I wondered about even alluding to the "rule".

Thanks for letting us know,

Strayshot · May 6, 2011

I did a search and still can't find rule 10..... (found 1 through 7) :blink:

Thanks for the info on the yoda position, I'll have to try that..

-Rick

Pale Rider 07 · May 6, 2011

Roadrunner...I'm in the same situation as you. I love the FJR, but I still have a slight forward lean that causes wrist and shoulder pain over longer distances. I have tried the riser blocks, which helped, but they still are not enough. I have been comparing the two units you are looking at. For me, I think they are pretty much the same in build quality. I need the maximum amount of adjustment and it seems as if the "other" brand can give this to me in a single piece of machined metal versus having to add riser blocks to the Helibar plate. Hopefully this will be my next farkle. Good luck!

Bounce · May 6, 2011

RPRice: I did the edit of the OP to remove the content that violated rule 10 while sending the warn.

Strayshot: It's on the FORUM GUIDELINES link right next to the VIEW NEW CONTENT link.

https://www.fjrforum.com/forum//index.php?app=forums&module=extras&section=boardrules

RoadRunner244 · May 6, 2011

Patriot said:
eezy peezy

trade that POS Gen II in for Gen I and you can immitate my solution(s)

:yahoo:

Like to see the checklist for flying that machine!

Strayshot · May 6, 2011

Bounce said:
RPRice: I did the edit of the OP to remove the content that violated rule 10 while sending the warn.

Strayshot: It's on the FORUM GUIDELINES link right next to the VIEW NEW CONTENT link.

https://www.fjrforum.com/forum//index.php?app=forums&module=extras&section=boardrules

Thanks for the pointer... I was looking under all the pinned topincs in the forums, didn't even notice the "Forum Guidelins" link at the top of the friggin' page! :headslap:

Having read that now, why would you even want to consider buying something from someone like that?

-Rick

Which bar riser plate?

Help Support Yamaha FJR Motorcycle Forum:

Member

Well-known member

Well-known member

Fish Cop (retired)

Member

Member

Well-known member

Member

Fish Cop (retired)

Chicks Dig Scars

Well-known member

Well-known member

Isabella is Lazarus

Fish Cop (retired)

Active member

Well-known member

Chicks Dig Scars

Member

Active member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!