Search results

The shims are a small diameter and you would have to really try to take off material unevenly. Also, if the shim is rotated every few strokes across the sandpaper the material comes offl evenly--enough so that I can't measure the difference with my highly accurate micrometer. I've been do this...

I have almost 100k on my 05. Each valve adjustment/check I can’t read the numbers on the shims because they have worn off. I have sanded the old shims to regain valve clearance for each valve adjustment. A reasonably accurate micrometer is required and the measured valve clearance has to be too...

For all that knock riding at high RPM you should know in addition to accelerated engine wear it has a practical side. I use the rev limiter as a speed control to keep from getting a speeding ticket. If the speed limit is around 50, I just leave the transmission in 1st gear—simple. As my speed...

Selling my Powerlet ProForm electric Jacket liner and dual controller. This is not a new item but is in excellent condition. I would still be using it but my wife bought Powerlet's newer liner (RapidFIRe liner) for me at Christmas. The ProForm liner uses internal wires for heating. The liner is...

Bump -- Lowered Price to $100 or best offer.

I can get into diagnostic mode on my 05. The number to the right of d1:01 will change when I push either the select or reset buttons. There is also a smaller number (font size) at the lower right of the screen. Which set of numbers are the diagnostic trouble code? What is the difference between...

I have a stock 05 with a PCIII. The PC made a real difference. I originally uploaded the Wally Smoothness map and my MPG dropped about 4 mpg. I modified the mid range RPM/Part Throttle cells and got the MPG back up to stock (about 43 to 46 mpg on the hwy). My fuel map has the best of both fuel...

Yes, This is called a MAP (manifold absolute sensor) if it's on a car. Yamaha calles it an air pressure sensor but is the same thing and works the same. It senses intake manidold pressure. There are 3 wires connected to the sensor. 1. Power = 5 volts from the ECU 2. Ground = ground from th...

10 oil changes in 33k? Let's see, that's $5 per filter x 10 = $50 + 40 quarts (4qts x 10 oil changes) at $6 per qt. = $240 + the $50 for the filters for a grand total of $290. Buying into the “Lube-n-Tune” advertising campaign of changing oil every 3000 miles is a complete waste of your time and...

I used to work at MCN and they do weigh the bikes with a full tank of fuel. Check out the review on the Richa jacket/pants in the same issue as the FJR review. The jacket is new technology and works great.

Don't bother with buying shims at the Yam dealer. Just sand the ones you have (you have to have a micrometer to measure how much you are taking off). I use 240 grit wet/dry paper with some light oil on it. After you get the shim where it needs to be use some 400 grit to polish the shim. I've...

Connect your multimeter to the 2 leads from the vest. Set the meter to read continunity (some meters will beep if there is continunity (compltet circuit through the vest). With the meter emitting a steady beep indicating that the wires within the vest are connected to the meter--start...

The Shoie Qwest helmet has channels for glasses. Mine go on without any issues and don't hurt my ears after a long ride.

I used the race-tech compression/rebound valving and springs on my 05 and it made a huge difference in handling. The installation is not hard if you already rebuild (or have rebuilt) any typical cartridge fork. It took me a Saturday to do bushings, seals, race-tech valving and spring. Well worth...

The battery's internal resistance increases as it becomes charged. With more internal resistance the amount of current (amps) that is delivered to the battery goes down. That's why it doesn't overcharge. However, I you connect a high-amperage, automotive type charger and pump 40 amps into a...

The rider misjudges the width of his bags, clips one on a post and rides off a boat dock and plunges 10' down. Looks like a Gen II --rider probably so in love with his FJR he forgot to look--you know thoes Gen II guys?????

Here is my review of the Qwest (published in RoadBike last year--can't remember what month?) Shoei Qwest Helmet   RoadBike Magazine   by: Tracy Martin [bODY TEXT] The Qwest by Shoei is a new helmet (replacing the TZ-R series) that has a lot to offer for a mid-priced model. I’ve owned most...

I got these Continentals and now have 6400 on them--looks like they'll go to around 10k easy. They are way inexpensive. Click HERE Front = $76 Rear = $112 Total of $188 Need to add shipping

Here is my procedure for fixing your problem. Its the 5th post down complete with pictures. Click HERE

I did the same as above only I used old license plates that I cut to shape. Now when my bike falls over I can bend the "wings" back into shape and ride--a real benifit on a long trip. The license plats are reflective as well and they were free.