Search results

There are also 2 un the under side.

Answers in the other forum.

Learn something new every day.(y)

Does the ABS light STAY on while riding? It will always come on when first starting the bike and won't go off until you ride 100 yards or so.

I had a relay issue on my ST1300. Fuel pump circuit problem. The relay bench tested fine, every time. Just for the heck of it I swapped that relay with another, and problem gone. It was the relay.

Excess grease to vent out.

If I read his sig line right he's got 2 ES's. It's not like he's gonna lose any ride time. I'm guessing it's not for the "garage queen" that only gets ridden 300 miles a year. He can send that one to you.

Yes when it gets warm it gets saggy. And it gets very warm, not as good as dissipating heat like good old foam.

I have similar to this except I keep the end tucked into an adhesive backed cable holder thingy stuck to the frame rail. Hasn't moved in 3 years.

Much better.

It's best to do your negotiating thru private messages. Especially when you're only offering a little over half the asking price.

No issues with EBC here. I like the initial bite. If switching to these just scuff your rotors with some 220 grit on a sanding block then spray them down with brake cleaner.

uhhh.... Yamaha?

How are they holding up? They didn't get the best reviews.

May I ask why you are determined to use a Breakaway? You've asked on more than 1 board, which is OK, but there are other options.

Read the thread. Even the part numbers are listed.

Congrats! Cool bike. I wish I had discovered adventure riding when I was younger. I moto camp off the FJR but won't do those remote fire roads. BTW no FJR is gonna do 160. Even Yamaha says top speed is 137. Although one article claimed 154 but that was not GPS. And I don't know how much...

You send your stock seats to Russel and they modify them.

You can also try WD-40 on a rag to remove the glue residue.

Those push pins shouldn't "disappear when you release them". You take a thin allen key or something similar, push in the middle until there is a slight click, then you pull the whole thing out by pulling up on the base. You may need to slip something thin that won't scratch under the base to...