Search results

Tip Jar.

Has 10 banks. Only $573 Here

Or -- skip the Radar audio, and get the Marc Parnes Visual Alert LED. I have it, works great, I prefer the visual over the audio.

Prior Thread (lengthy read) Short version: If the '07 is same/same as '06 AE -- no problems.

Have you considered ThrottleMeister? I have a set with factory heated grips -- no problems.

But if you're gonna use the oil filter, you gonna need an additional 0.23 quarts of something. Might I recommend Delo or Delvac for the additional 0.23 Quarts?? :)

Clicky

Dale, Good post... That's a good read even if you're a CBA member! Specifically some of the appendix on the sample packing list -- makes a good check list basis for any trip. Thanks!

I don't think Yamaha shot itself in the foot. It's a sport-tourer! Linked ABS brakes, electric windshield, 642 lbs. People quickly add cruise control or throttle locks, It's a bagger..... If you wanted to drag-race -- you may have purchased the wrong machine! ;) I think yamaha hit the...

If you get 5% to 10% better gas mileage.... and Premium costs 78% more (that is using 2.819 reg, 2.949 plus, 3.039 premium)... EDIT: 7.8% (typo) Then does it really matter?

dcarver's post: Clicky complete with pics

I leave it in gear at a light. The bike won't go anywhere until the RPM gets above 1300, so the FJR will not move until you give it throttle. The FJR will only roll freely for a few seconds after the ignition is turned off in gear. To move the motorcycle after that -- you will have to turn...

... Gen II FSM page 3-9, Step #8 a. With throttle body #3 as standard, adjust throttle bodies #1, #2, and #4 using the air screw #1 On page 2-8 in the specification, it does show at Idle, the intake vacuum should be 33.3 kPa (9.8 inHg) (250 mmHg), but there is no mention of adjusting #3 to...

How would this work for an out-of-state violation?

some of us dumb ass engineers have practical solutions! -- or -- even a blind squirrel gets a nut on occasion. go figure? Also there are safety wire washers: Put them under the bolt, bend the tab up, and safety wire your drilled bolt to the washer tab!

Try using a hose clamp: Here's a link with other ideas for other areas: Clicky or at Sport Rider Clicky

I tried to clarify it in the bin -- take a look and see if its better or more confusing now. Link

I also have a Canon SD600, very small, good quality pictures, ok optical zoom. Review by CNET

WW Even if you stick with the one tube U design -- I'd still recommend calculating the volume (or empirially determining) of the fluid. Then design some PVC traps to collect the fluid in the event that one of the tubes comes off the vacuum port (without traps -- this will allow the fluid to...

NWS: Try here Clicky