2006 Aux. Fuel Cell

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Uncle Bud

R.I.P. Our Friend
Joined
Nov 6, 2005
Messages
38
Reaction score
0
Location
Monument, CO
Hi All,

I am working on ideas for an Aux. Fuel Cell for my 2006 FJR1300A and was wondering if anyone had any pictures of intalling the fitting on the fuel tank.

Thanks in advance!!!

 
Hi All,
I am working on ideas for an Aux. Fuel Cell for my 2006 FJR1300A and was wondering if anyone had any pictures of intalling the fitting on the fuel tank.

Thanks in advance!!!
I am wondering the same thing. Any pics or description of where you have put the bulkhead fitting on an 06.

Thanks

 
I am wondering the same thing. Any pics or description of where you have put the bulkhead fitting on an 06.
Thanks
Already answered by Skyway. See the link he provides. '06 is going to be same as the other years. It's not a Gen I vs. Gen II think for this.

 
Is that similar to this here?

ron003-600x450.jpg


https://www.tourtank.com/index.html

 
I am wondering the same thing. Any pics or description of where you have put the bulkhead fitting on an 06.
Thanks
Already answered by Skyway. See the link he provides. '06 is going to be same as the other years. It's not a Gen I vs. Gen II think for this.
Pardon me? The link you mention certainly provides most excellent bulkhead fitting installation info but the link provider adds,

This is an 03-05 FJR installation, so check your 06 tank before drilling away.
and is precisely why I have asked for information relative to where to locate the bulkhead fitting on a Gen II.

In the following links, kindly sent to me by another Gen II owner, the differences are noted.

https://www.cal24.com/fjrmods

Scroll down to "bulkhead installation"

https://www.fjrforum.com/forum//index.php?s...c=15268&hl=

Regards,

 
Top