Any ideas for Kickstand Enlarger

[Rider_FJR]

I was looking for a kickstand enlarger. I found couple, but was shocked to see a $59 and $74 price tag.

https://www.egmcartech.com/store/Yamaha-Fjr-1300-Side-Stand-kickstand-Enlarger-Pad-Black-2001-To-2012_321774684721.htmlhttps://www.egmcartech.com/store/Yamaha-Fjr-1300-Side-Stand-kickstand-Enlarger-Pad-Black-2001-To-2012_321774684721.html

link2:

Link

Are there any other options?

 

[Twigg]

Yep ... Make your own:

 

[Full House]

Wynpro's "Bigfoot" is the favorite here. Forum member makes them.

 

[LKLD]

Here >>>>> https://www.fjrforum.com/forum//index.php/topic/125329-wynpro-big-foot/

 

[Rider_FJR]

Here >>>>> https://www.fjrforum.com/forum//index.php/topic/125329-wynpro-big-foot/

Perfect. Thanks. Will contact Dave Wynne to place an order.

 

[Redfish Hunter]

Wynpro's "Bigfoot" is the favorite here. Forum member makes them.

+1

A superb product provided by a wonderful person. Cannot go wrong here.

 

[kurbennett64]

Ditto on the Wynpro Bigfoot. Nice little piece of kit.

 

[Teehaml]

Rockin' my Wynpro Bigfoot. It's perfect.

Dave has Balls too...

here>> https://www.fjrforum.com/forum//index.php/topic/124395-wynpro-ram-bone-mount-ive-got-balls/

 

[James Burleigh]

Or you could do in naturally....

 

[Warpdrv]

^^^^ LMAO^^^

FYI - you might have to grind the bottom of the kickstand to make it flat, then use thread locker on Dave's BigFoot !!

 

[lonerider]

I keep one of these https://www.amazon.com/gp/product/B00CPGQ1GO?psc=1&redirect=true&ref_=oh_aui_search_detailpage in the fairing storage compartment with a length of mason's string attached and just use it as needed.

 

[FjrVfr]

No question, Dave is a class act and makes top shelf items. You've got me thinking about a Big Foot myself (though I still need to install his PAIR covers on my current sled). Even if I do I'll still keep one of these in my fairing box for .50 cents (Lowes). Cheap insurance that can be passed along to fellow riders.

 

[DennisJ]

I carry a junction box cover as shown above with a braided cord threaded through a screw hole in the one I have (not shown in the one pictured) Fits nicelly in my Tank Bag, haven't tried to fit it in the glove box, have to much stuff in there as it is. The cord I attached is long enough that I can wrap it around the clutch and handlebar and so far I haven;t managed to ride off without retrieving it. Give me some time though.

 

[FJRay]

I take a piece of scrap steel and band saw a reasonable shape. Lean the bike on the steel which keeps it flat. One lap with the MIG and a little rattle can black. Done deal. It can't fall off and you can't forget it.

 

[Big Sky]

A handy crushed beer can works, too.

 

[bigjohnsd]

Viagra

 

[N4RNV1]

I have used a Large steel washer on my FJR's . With the stand in the up position,mark it where it clears the can and set the side stand down on the washer in the marked position, a couple of welds and a rattle can and it looks stock. WAH LAA! Grind any extra off for ground clearance issues and save your self Big $$$. Works great for me.

 

[Bounce]

This: https://www.aerostich.com/sidestand-plate-app.html

Or this: https://www.aerostich.com/aerostich-carbon-fiber-sidestand-plate-cfsp-standard.html

 

[BkerChuck]

Or this:https://www.aerostich.com/kickstand-kritters.html

I guess they don't offer the squirrel anymore.