Audiovox Help

Yamaha FJR Motorcycle Forum

Help Support Yamaha FJR Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Freesundae

Well-known member
Joined
Jun 15, 2005
Messages
53
Reaction score
0
All, I am currently installing the audiovox unit on my non-ABS '05 somehow I lost my install manual. Do both the grey wire from the control pad and the fused red/orange wire go to switched 12volts? I have the barrier strip install that Warchild did, can I run both of them to the strip?

Everything else I could pull from fjr1300.info install. These two just have me a little confused.

Thanks.

Tim

 
Do both the grey wire from the control pad and the fused red/orange wire go to switched 12volts?
Thanks.

Tim
@Tim,

The grey wire is the optional one, the red/orange is not optional.

So, yes, the red/orange wire should go to switched 12v, and as for the grey wire...

Yes, if you want the control pad to be backlit.

No, if you don't care about backlighting.

Shane

 
Top