With winter here in MN, I thought I would add a CC to my 2009 AE. I did a slight mod to my throttle bodies so I had a little more room than what most are doing. You can see the new throttle stop that you would normally drill and put a screw in it.
I used a 6MM brake line and bent it around as needed. I then push the cable outer housing into the brake line. I also added a cable adjustment.
I attached the other end under the OEM cables. If you look close, you will see the outer housing of the cable poking out below the brake line.
Here is what it looks like. It tucks under the vac sensor nicely.
Here is a close-up with the cable installed
I wanted a little more room on the controller (audiovox rostra) so I made a new shorter end. Here is the original and mine
I used a 6MM brake line and bent it around as needed. I then push the cable outer housing into the brake line. I also added a cable adjustment.
I attached the other end under the OEM cables. If you look close, you will see the outer housing of the cable poking out below the brake line.
Here is what it looks like. It tucks under the vac sensor nicely.
Here is a close-up with the cable installed
I wanted a little more room on the controller (audiovox rostra) so I made a new shorter end. Here is the original and mine
